NickisGod Posted August 23, 2008 Report Share Posted August 23, 2008 Im in the process of a rebuild but have forgotten how to mount the radiator. i got the two bolts on the sides screwed down, but i forgot how the third top bolt connects. i know it involved that big metal collar thing but i cant seem to figgure it out, or locate another post regaurding my question. can some one post me a picture? another question i have, where does the hose from my pro design cool heads go? is it just a breather? im talking about the hose on the top of the heads near the spark plugs. thanks Quote Link to comment Share on other sites More sharing options...
boneyardbanshee. Posted August 23, 2008 Report Share Posted August 23, 2008 the rad. mount is connected to the sterring stem clamp. the hose from the head goes up by the rad cap. Quote Link to comment Share on other sites More sharing options...
NickisGod Posted August 23, 2008 Author Report Share Posted August 23, 2008 picture(s)? Quote Link to comment Share on other sites More sharing options...
boneyardbanshee. Posted August 23, 2008 Report Share Posted August 23, 2008 the bolt with the collar goes into the stem clamp then the top bolts into the end of the collar. the hose goes on the back side of the rad. right by the cap. sorry cant do pics Quote Link to comment Share on other sites More sharing options...
boneyardbanshee. Posted August 23, 2008 Report Share Posted August 23, 2008 you should pik up a Clymer manual. there is tons of info with pics. deffinatly a must have. Quote Link to comment Share on other sites More sharing options...
NickisGod Posted August 23, 2008 Author Report Share Posted August 23, 2008 alright well all i realy need is a picture. ill greatly appreciate one Quote Link to comment Share on other sites More sharing options...
INFINITIED Posted August 23, 2008 Report Share Posted August 23, 2008 alright well all i realy need is a picture. ill greatly appreciate one What is throwing you off is your probly missing the the bolt that holds the steering stem on.. you put a regular bolt on there insead of the one with the hole through the center!!! .. ok look @ # 6 , 9 , 5 , 8 . all of those numbers screw into the middle of the bolt. that holds the steering stem on . only one side of the stem has a special bolt.(with thread drill in center of it ) (make sure you have 6,9,5,8, because if you dont bolt #6 will botom out and snap) . hope this makes sense . you have done it before you know what chinese shit i am talking about .. Quote Link to comment Share on other sites More sharing options...
INFINITIED Posted August 23, 2008 Report Share Posted August 23, 2008 i found it .... you need number 10 , your using two #9 and you dont know where to mount the radiator ! and the hose from the cool head goes back to the radiator. (not the overflow) there is a neck on the right side . look @ radiator its the same size as the overflow. Quote Link to comment Share on other sites More sharing options...
NickisGod Posted August 24, 2008 Author Report Share Posted August 24, 2008 i feel stupid because i figgured it out before i read your post. & yes your explantion was good and makes perfect sence. i bought a that stainless steel bolt kit of ebay and the bolts are alan head bolts. i had remembered a funky looking bolt and when i gave digged it i discovered it was a specialty bolt with a threds taped inside the bolt itself. thanks for the help, i hope this will anyone else like me with the same problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.