banshee 1 Posted August 14, 2008 Report Share Posted August 14, 2008 I have an 02 Banshee with 350 in frame cpiracing pipes, Vforce 2 reeds, stock carbs, k&n filter, boost bottle, +4 timing.i'm in washington state at about 400 to 500 ft. elevation.need advice on where to set jets and needle size, etc. Please help!! Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 18, 2008 Report Share Posted August 18, 2008 Is it a K&N pod or is the K&N in a an air box? If it is in an air box, are you running a lid? This will make a huge difference when jetting. Post this info up and someone should be able to help you. Quote Link to comment Share on other sites More sharing options...
banshee 1 Posted August 18, 2008 Author Report Share Posted August 18, 2008 Is it a K&N pod or is the K&N in a an air box? If it is in an air box, are you running a lid? This will make a huge difference when jetting. Post this info up and someone should be able to help you. I have both pod and in box filters. right now i am running an in box. the lid is on but there are three one inch holes drilled in it. lid came that way. Quote Link to comment Share on other sites More sharing options...
Michael Jackson Posted August 19, 2008 Report Share Posted August 19, 2008 id try the stock needle on the 4th clip to start your main sounds pretty rich, especially for running a lid Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.