Black01Shee Posted August 2, 2008 Report Share Posted August 2, 2008 I have a slight bog right before i hit powerband, its more noticible when under load at low rpms and throttle is applied, but once it hits powerband its fine after that. I have a dynoport 2 into 1 pipe and snorkel removed. My air screws are 2 turns out Quote Link to comment Share on other sites More sharing options...
brugal Posted August 2, 2008 Report Share Posted August 2, 2008 1/4 to 3/4 on the throttle your needle clip position may rich or lean. Quote Link to comment Share on other sites More sharing options...
Black01Shee Posted August 2, 2008 Author Report Share Posted August 2, 2008 (edited) well the plugs were new and after about 3 hours of riding one side (about 1/2) of the porcelain is a very dark brown almost black color the other side still looks like new. How do i adjust the needle clip Edited August 2, 2008 by Black01Shee Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.