RACERMB Posted August 1, 2008 Report Share Posted August 1, 2008 Shee runs fine other wise but will not idle. Started same time shifter return spring broke related? 95, with pj carbs, trinity pipes k&n filters Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted August 1, 2008 Report Share Posted August 1, 2008 Well, I'd say your carbs probably need to be cleaned and synched. If you know your setup and jetting you should post that up in the jetting section and somebody can tell you if your close or not. I don't think it's related to the shifter return spring. Also, have you done away with the TORS? If not, I would suggest doing that it will save you a ton of headaches. Quote Link to comment Share on other sites More sharing options...
brugal Posted August 2, 2008 Report Share Posted August 2, 2008 Adjust your airscrews then adjust your idle screws. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted August 2, 2008 Report Share Posted August 2, 2008 How long has it been since the pilots have been cleaned? Does it start hard? Quote Link to comment Share on other sites More sharing options...
RACERMB Posted August 2, 2008 Author Report Share Posted August 2, 2008 (edited) shee does not start hard pull the chokes on and one or two kicks and shee fires right up cold and no choke one kick when warm. pilot jets have not benn cleaned for about 6 months. air and idle was fine problem just started all of a sudden riding down a trail stopped at a cross road and stalled at idle bam no more idle. tors have been removed fist thing done when i got the bike. replaced staock carbs with 34mm pjs about a year ago. Edited August 2, 2008 by RACERMB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.