bansheesickness Posted July 7, 2008 Report Share Posted July 7, 2008 i know that the best way to check your plugs is to chop them, but i have never done it. so do i cut the plug in half at the base of the treads or do you cut all the way around the threads so as not to cut the ceramic inside? thanks for any info Quote Link to comment Share on other sites More sharing options...
BB3 Posted July 7, 2008 Report Share Posted July 7, 2008 You want to cut the threads off and leave the ceramic intact. Quote Link to comment Share on other sites More sharing options...
brugal Posted July 7, 2008 Report Share Posted July 7, 2008 When you cut the thread look for the ring around the base of the electroid.2mm chocolate-brown ring is spot on.Taller then 2mm or darker brown your rich.If the ring is smaller the 2mm or lighter,or nonexistent your lean on the mains. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.