Face Posted June 23, 2008 Report Share Posted June 23, 2008 I want to remove the parking break assembly from my 89 shee. I looked at it the other day and cant really tell how. It seems that the assembly is one with the clutch lever assembly. Am I missing something or what. how do I get this huge nasty looking thing off my bike!? Quote Link to comment Share on other sites More sharing options...
stink989 Posted June 23, 2008 Report Share Posted June 23, 2008 i think you have to get a hole new leaver and assembly Quote Link to comment Share on other sites More sharing options...
magz Posted June 23, 2008 Report Share Posted June 23, 2008 i think you have to get a hole new leaver and assembly i used a cutoff wheel, you can make it nice and smooth if you cut it right. take your time. take your time and take your time if you go that route. or just buy one. Quote Link to comment Share on other sites More sharing options...
lilmegill727 Posted June 23, 2008 Report Share Posted June 23, 2008 yeah you need a whole new lever set-up and a rear brake block-off plate and i think something else. Quote Link to comment Share on other sites More sharing options...
tundish2800 Posted June 23, 2008 Report Share Posted June 23, 2008 I used a cut off wheel and it looks fine just paint it and you are good to go. You can get a block off plate for less than $15. Quote Link to comment Share on other sites More sharing options...
Michael Jackson Posted June 23, 2008 Report Share Posted June 23, 2008 remember to follow the parking break sensor wire from the perch, down about a foot or so, and unplug it, big plastic connection thing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.