inthemail Posted June 10, 2008 Report Share Posted June 10, 2008 impact gun is the only way to go on this cocksucker, i used a rubber wrench to hold the flywheel while i backed the nut out. greased the threads on the correct puller turn it in untill it stops. thread in center (greased of course) and put the impact gun to that too strap wrench still holding the flywheel. worked first try. proper tools are the only tools i couldnt say it any better! Quote Link to comment Share on other sites More sharing options...
brugal Posted June 11, 2008 Report Share Posted June 11, 2008 the block of wood under the piston like the book says to use(clymer) What :yelrotflmao: On what page does it say that? They sell a flywheel holding tool that latches onto the frame. Quote Link to comment Share on other sites More sharing options...
ny98banshee350 Posted June 15, 2008 Report Share Posted June 15, 2008 What :yelrotflmao: On what page does it say that? They sell a flywheel holding tool that latches onto the frame. lol its on page 105, i used a block of oak flooring and it slides under the piston and stops everythin from movin, worked for me soo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.