BaNsHeEs RuLe! Posted May 26, 2008 Report Share Posted May 26, 2008 Hey guys, I know a lot of you have dealt with Jim at Passion, I need my jugs on the stocker ported, my other bikes were done by Duncan (MX and full drag) and are great, but expensive. I just want a MX/recreational port on this bike, my wife and my friends ride it and I wan't to give it a little pep. I have some PT mids coming and a Noss head and timing plate, going to keep the stock carbs on it, the only other thing is K&N pods. His port price is $325 and he said he could make it run just like I want. I'm not real picky, just want to make sure it's reliable. I guess I am looking for some feedback on his work and his turn around. I live about 3 hrs a way so I would just drive my motor up. Kinda thinking about just doing a 4mm stroker while it's there but, that's another story......and what advantage would the 12 port porting be on a stock stroke engine??? Thanks!!! Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted May 26, 2008 Report Share Posted May 26, 2008 I would trust him with my jugs. Quote Link to comment Share on other sites More sharing options...
sheeblue01 Posted May 26, 2008 Report Share Posted May 26, 2008 I had him build my entire engine and I am more then pleased with what came back to me. I have yet to start it up yet but if it runs half as good as it looks, I will be in for a shit-ton of smiles. Quote Link to comment Share on other sites More sharing options...
kawiking Posted May 26, 2008 Report Share Posted May 26, 2008 ive only heard good things about jim... how soon are u plannin on doin this ?? i know alot of these builders are back up.... im having jeff at f.a.s.t. do mine.... ask what their turn around time is.. i hear herrjuggs does some bad ass portin to, and has great turnaround time... do a search on them. but as far as jim at passion.... heard he's really good !!! and a great guy Quote Link to comment Share on other sites More sharing options...
BaNsHeEs RuLe! Posted May 26, 2008 Author Report Share Posted May 26, 2008 (edited) ive only heard good things about jim... how soon are u plannin on doin this ?? i know alot of these builders are back up.... im having jeff at f.a.s.t. do mine.... ask what their turn around time is.. i hear herrjuggs does some bad ass portin to, and has great turnaround time... do a search on them. but as far as jim at passion.... heard he's really good !!! and a great guy Thanks guys, I'll try HerrJugs , and call Jeff, Probably can wait till winter. Just want the best job possible for around $300-$350. Edited May 26, 2008 by BaNsHeEs RuLe! Quote Link to comment Share on other sites More sharing options...
sinisterboo Posted May 26, 2008 Report Share Posted May 26, 2008 Jim is actually located about 6 miles from me, but I have never met him! Maybe i need to find out how to get in touch with him. Quote Link to comment Share on other sites More sharing options...
NYUK Posted May 26, 2008 Report Share Posted May 26, 2008 i put a 4 mil passion 12 port bike together for a kid on here. i was real suprised. it was a stout motor. smoked the tires through all 6 gears. killer bottom end. i was impressed. i have had alot of motors built by other builders. and have owned countless banshees. Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted May 26, 2008 Report Share Posted May 26, 2008 I have a mx port from Jim and the thing is a monster for just some small porting, It pulls hard trough alll te gears< its a blast to ride.. His turn around time isnt the greatsest, but he does great work, def worth the wait.. Quote Link to comment Share on other sites More sharing options...
kawiking Posted May 26, 2008 Report Share Posted May 26, 2008 Thanks guys, I'll try HerrJugs , and call Jeff, Probably can wait till winter. Just want the best job possible for around $300-$350. id try all three and see what "u" thinks right for you.... passion,f.a.s.t. and herrjugs are all good builders..... cant go wrong with any of them Quote Link to comment Share on other sites More sharing options...
BaNsHeEs RuLe! Posted May 26, 2008 Author Report Share Posted May 26, 2008 i put a 4 mil passion 12 port bike together for a kid on here. i was real suprised. it was a stout motor. smoked the tires through all 6 gears. killer bottom end. i was impressed. i have had alot of motors built by other builders. and have owned countless banshees. Damn, all six, shit I'm calling Jim for sure. I can wait...no problem there, thinking about just carrying the whole bike and having him do the motor. 4mm stroker for the trails.....it never stops does it??? Quote Link to comment Share on other sites More sharing options...
banshee332 Posted May 26, 2008 Report Share Posted May 26, 2008 IMO Jim is the man to go to. been dealing with him for years. great guy to deal with and his motors haul the mail Quote Link to comment Share on other sites More sharing options...
moneybags Posted May 27, 2008 Report Share Posted May 27, 2008 I have a 421 cub with a clean up port from Jim. That thing was insanely fast... I sent it back to him to make it faster. Quote Link to comment Share on other sites More sharing options...
banshee332 Posted May 27, 2008 Report Share Posted May 27, 2008 I have a 421 cub with a clean up port from Jim. That thing was insanely fast... I sent it back to him to make it faster. wait till you get it back. Its going to be a whole different bike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.