Flanagans twin Posted May 13, 2008 Report Share Posted May 13, 2008 i have my 450 a arms with 450 shocks on my shee and it sits ridiculously low. maybe 9 to 10 inches of ground clearance, when i lift it up in the front the shocks spring up nicely and that seems like thats where its supposed to sit but the shocks just sink back down when i let go of the front. the shock adjustment nuts are about 7-8 threads down on the shock itself, should i bring em back up to the top? or will that make it worse? thx Quote Link to comment Share on other sites More sharing options...
racer Posted May 22, 2008 Report Share Posted May 22, 2008 trial and error Quote Link to comment Share on other sites More sharing options...
DJ LiL Mike Posted May 30, 2008 Report Share Posted May 30, 2008 maybe ur shocks are blown, need heavy duty springs, or need to tighten up the spring by screwing the bolt lower. Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted June 6, 2008 Report Share Posted June 6, 2008 (edited) the 450 set up just sits a lot lower than stock. Best thing i did with my 450 set up was take it off and put it back to stock. It was just too rough...... amen. Edited June 6, 2008 by RagunCajun Quote Link to comment Share on other sites More sharing options...
Flanagans twin Posted July 10, 2008 Author Report Share Posted July 10, 2008 alright thanks guys i was gone there for a while workin, but anyways im going to tighten them up a lil bit today and see what happens. thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.