89bansheemx Posted March 24, 2008 Report Share Posted March 24, 2008 who makes good cheap reliable CDI boxes and also whom do y'all recommend for porting, TRINITY VS. DUNCAN RACING, i mostly ride desert trails, beach and dunes, my current setup, STOCK CARBS K&N PODS BOYESEEN REEDS 20 CC DOMES LIGHTENED FLYWHEEL DESERT GAS TANK TRAIL TECH LITES +2 ARMS DURABLUE AXLES WORKS FR. SHOCKS REAR ZR1 SHOCKS WORK TWIST THROTTLE Quote Link to comment Share on other sites More sharing options...
Frogger Posted March 24, 2008 Report Share Posted March 24, 2008 (edited) For the porting I know a lot of guys use FAST Racing or Herr Jugs. I don't have any personal experience with either but come highly recommended. Personally, I would talk to slobanshee06 (Brandon) he'll hook you up. He does a hell of a job. I raced his bike at LS in Ut this Easter weekend and there weren't to many passing that bike!!! Edited March 24, 2008 by Frogger Quote Link to comment Share on other sites More sharing options...
dajogejr Posted March 24, 2008 Report Share Posted March 24, 2008 No one makes a good, cheap, reliable CDI box. Use the stocker...unless you want to shell out the extra coin for a Dyna or MSD. get a plate for 35, set it at what your builder/porter recommends for your riding type. I wouldn't give Trinity or Duncan a dime to port my motor.... Quote Link to comment Share on other sites More sharing options...
fun_on_the_sand Posted March 25, 2008 Report Share Posted March 25, 2008 No one makes a good, cheap, reliable CDI box. Use the stocker...unless you want to shell out the extra coin for a Dyna or MSD. get a plate for 35, set it at what your builder/porter recommends for your riding type. I wouldn't give Trinity or Duncan a dime to port my motor.... I second that... I got a couple of cheap CDI boxes, they never worked fine... and electrical problems is something you want to stay away from in the middle of the desert, if you go for one go for the Dyna, EXCELENT product For porting I would recomend you to go to the best local shop, do some shopping, talk to the guys doing the porting, take a look at the work thay have done, tell them what you want to do... porting has to do not only with the air/fuel flowing through your cylinders but also with the timing, and the timming is afected by the CDI box you want to install... so, whoever does the port job has to know what you wanto to do with your bike... just my experience, good luck Quote Link to comment Share on other sites More sharing options...
njbanshee Posted March 25, 2008 Report Share Posted March 25, 2008 My first purchase would be vforce reeds. You will see a huge difference over those boyeseens. Then call jeff and have him port your juggs. Don't do a play port, go with the dune port. Make sure you have some meat on them tires cause you'll need all the grip you can get. After that my next mod would be carbs. good luck Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted March 30, 2008 Report Share Posted March 30, 2008 Stay stock ign, and spend the $25 it will cost for shipping and have Jeff at Fast, Nate Mcoy at Mccoy's , or K/T do your cylinders and it'll rip. Those 3 have done some of the fastest I know of and they held up well. All are helpful and will take care of you. Quote Link to comment Share on other sites More sharing options...
89bansheemx Posted March 31, 2008 Author Report Share Posted March 31, 2008 Stay stock ign, and spend the $25 it will cost for shipping and have Jeff at Fast, Nate Mcoy at Mccoy's , or K/T do your cylinders and it'll rip. Those 3 have done some of the fastest I know of and they held up well. All are helpful and will take care of you. THANKS Y'all i look into fast for the porting, dune port is the way to go from what everyone recommends... Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted April 4, 2008 Report Share Posted April 4, 2008 Jeff's good people and he's got the best customer service around. Oh yea, he knows his shee's very well. Hasn't steared me wrong yet................ Quote Link to comment Share on other sites More sharing options...
NOS_350x Posted April 23, 2008 Report Share Posted April 23, 2008 Im happy with my duncan motor. Havent been beat by anything with an equal size motor. (now im not sayin it the fastest but it does run GOOD) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.