foxracing350 Posted February 22, 2008 Report Share Posted February 22, 2008 i just got one and now i need to know how to put it in? Quote Link to comment Share on other sites More sharing options...
man27 Posted February 22, 2008 Report Share Posted February 22, 2008 i just got one and now i need to know how to put it in? Get you a clymer and look at chapter 10 its pretty easy take the clutch cover off and pull the clip a few screws just follow the directions.... :biggrin: Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted February 22, 2008 Author Report Share Posted February 22, 2008 i have a clymer...duh im retareded thanks Quote Link to comment Share on other sites More sharing options...
man27 Posted February 22, 2008 Report Share Posted February 22, 2008 i have a clymer...duh im retareded thanks It happens to the best of us I know I"m not the smartest guy in the world either!!!!! :shoothead: Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted February 23, 2008 Author Report Share Posted February 23, 2008 does anyone use the pro design ez drain water pump cover? how is it? worth the 40 bucks? Quote Link to comment Share on other sites More sharing options...
man27 Posted February 23, 2008 Report Share Posted February 23, 2008 does anyone use the pro design ez drain water pump cover?how is it? worth the 40 bucks? I don't think it's worth 40 bucks you can put a big enough pan under the front motor and pop the hose off and it's no big deal save the 40 bucs for fuel and tear it up!!!!! :beer: Quote Link to comment Share on other sites More sharing options...
pabansheematt Posted February 23, 2008 Report Share Posted February 23, 2008 does anyone use the pro design ez drain water pump cover?how is it? worth the 40 bucks? If you really want one for free. Modify your stock one it's not hard. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted February 23, 2008 Report Share Posted February 23, 2008 If you really want one for free. Modify your stock one it's not hard. I agree. Pull your cover off, drill and tap it and get a little bolt that fits the hole. Get a bronze or brass washer to go between the bolt and the case and screw it in tight, then flip the cover over and take a dremel and smooth the back side of it down flush with the cover so it doesn't eat into your impeller. Save the $$ and get something else that you will see a gain from. Timing plate, get your stock head milled, extra gaskets, extra sprockets... there's lots more out there you can spend the money on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.