Jump to content

should i race him?


Recommended Posts

this guy is challenging me to a race on a kfx400 that is "i got my rod shorted 5mm i am bored out so my motor is now a 513cc from a 400 i got the stage 3 hot cams and 5 shot of nos"

 

 

he said his times were like this

 

first run in the 1/8th mile did 89mph and the rest i been up at 95mph

marosso i would do bout120mph in the 1/4 mile i dont rember off the top of my head just the speed

 

also, in this covo, "marosso" is moroso and i think if he was there he would know that, an he spelled it wrong atleast 3 times, also moroso doesnt let atv's run 1/4 mile as well as i dont think he would be able to get that kfx anywhere near 120 with out over gearing it and taking 1/2 mile to get there

 

oh, and of course he thinks because i mud my bike its not a drag racer so he really wants to talk shit, and now wants to put big money on this race, i have a set of 18cc domes for my cool head, that when i ran at moroso in the 1/8th mile like they allow you to run, on dirt tires i ran 9.0's not bad for t5's, a coolhead, and a k&n and spinning for the 1st 60ft

 

the real reason i'm posting here is too see what you guys think of this race and if its anywhere near possible for him to really come around me and just spank me

Link to comment
Share on other sites

What is a 5 shot of nos? 5 HP? I think I can fart that much....if not, a healthy shit would take care of that...

 

120MPH in the 1/4..huh? Unless he has a lot more mods or a different secret engine, that just isn't going to happen.

 

It's all about gearing, tire size....and the power to push it.

 

You could gear a banshee to do 150 MPH....good luck building a motor to do it...:)

 

I call bull, call him out on it...put his money where his mouth is.

 

He'll probably give you a good race for 30 to 50 feet...4 strokes come out of the hole hard. Should be a walk in the park after.

 

Get a time slip from him to prove it.....

Link to comment
Share on other sites

What is a 5 shot of nos? 5 HP? I think I can fart that much....if not, a healthy shit would take care of that...

 

120MPH in the 1/4..huh? Unless he has a lot more mods or a different secret engine, that just isn't going to happen.

 

It's all about gearing, tire size....and the power to push it.

 

You could gear a banshee to do 150 MPH....good luck building a motor to do it...:)

 

I call bull, call him out on it...put his money where his mouth is.

 

He'll probably give you a good race for 30 to 50 feet...4 strokes come out of the hole hard. Should be a walk in the park after.

 

Get a time slip from him to prove it.....

:bunny:

 

i think i can get a 10-15 shot after my dinner last ngiht

Link to comment
Share on other sites

if i had the money for some race gas i woulda been out there racing him today, i just didnt have the money for gas for the bike or the truck let alone the money he wanted to put up for the race lol he also gave me the offer of running for titles and i said i would have to pass as this is my main ride. i guess my next free weekend i should call him up and run him. the wierd thing is you usually hear these coversation amongst friends, this guy just im's me out of nowhere talkin shyt about banshees

 

and for a fact, i know my banshee hung with a 450r with a big bore kit an some shyt done with the cams an a pipe, i mean i lost but maybe by a bike or 3

Link to comment
Share on other sites

i think hes full of shit

 

but he could just have a fast bike

 

you could do what 06banshee was talking about that would be awesome,just tell him that you clean your bike really well and put drag tires on

run it for pinks once you see his bike , sell it on ebay and split the money

Link to comment
Share on other sites

the kind of guys who would say shit like that about his 400, isnt the kind of guy who is gona hand over his pinkslip after a race, good luck... he will lose by 100 feet and just keep goin and youll never see him again..

alot of people that i ride with say they wanna race for slips... they never give em up...

Link to comment
Share on other sites

let me get this right... he shortened his connecting rod 5mm.... it must have like 30 lbs of compression

He shortened the rod?

What did he do,cut part of it off and put it together with JB weld?LOL!!!!

Even if this was possiable,he would of had to replace his' piston or his compression would go bye-bye.

Yeah,this guy has to be blowing smoke.

If he was as fast as he said,that rig would have enough nitrous to blow that piston and "shortened rod" to pieces. :down:

Link to comment
Share on other sites

lol sounds like a plan, but i kno 06, isn't ur bike pretty? he'll never believe it's a mudder lol an no, he hasnt seen me, so you could do it, as long as he hasnt seen any pics of my shee, but when you sell his bike we split the money?

 

 

Polished Cub cylinders,OOF show chrome Pipes,Override transmission...sounds like a mudder to me lol hey if hes serious Ill do it and we split the earnings of the bike?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...