chevrolet banshee Posted February 3, 2008 Report Share Posted February 3, 2008 I am trying to bleed my front brakes. And it ain't working. i pump and pump and they wont build any pressure, I get a little fluid out of the calipers but thay just wont build pressure. I did the back one just fine but no front, its pissing me off. I need some help pleas. Chevshee Quote Link to comment Share on other sites More sharing options...
ohiobanshee Posted February 3, 2008 Report Share Posted February 3, 2008 http://www.bansheehq.com/forums/index.php?showtopic=89363 Check this thread out. Quote Link to comment Share on other sites More sharing options...
gentner8 Posted February 3, 2008 Report Share Posted February 3, 2008 (edited) are you sure the master cylinder is good? Fill it, squeeze, crack open until no fluid, shut while still holding handle, release, refill repeat.... If you pushed the brake pistons all the way into the caliper, it will take more cycles. But I think that posts methods sound much easier. Thanks for that post dude. It takes a lot of beer and cussing when I work with brakes. Edited February 3, 2008 by gentner8 Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted February 3, 2008 Report Share Posted February 3, 2008 if your going from a dry line... good luck. i tried for 2 days, finally i went and got a bleeder at sears. Quote Link to comment Share on other sites More sharing options...
ohiobanshee Posted February 3, 2008 Report Share Posted February 3, 2008 But I think that posts methods sound much easier. Thanks for that post dude. It takes a lot of beer and cussing when I work with brakes. :thumbsup: Quote Link to comment Share on other sites More sharing options...
chevrolet banshee Posted February 3, 2008 Author Report Share Posted February 3, 2008 yes i got brakes!!! I put a hose on the bleeders and sucked. Chevshee Quote Link to comment Share on other sites More sharing options...
wesw Posted February 3, 2008 Report Share Posted February 3, 2008 eddy i got a one man brake bleeder for sale. make it a lot easier. hit me up in chat and what not. Quote Link to comment Share on other sites More sharing options...
TNTS355 Posted February 5, 2008 Report Share Posted February 5, 2008 I am trying to bleed my front brakes. And it ain't working. i pump and pump and they wont build any pressure, I get a little fluid out of the calipers but thay just wont build pressure. I did the back one just fine but no front, its pissing me off. I need some help pleas. Chevshee I just did mine a couple of weeks ago. I used the "mityvac" from O'Reilly's. Worked great, and you can use it for other stuff. It cost around $35.00 but it was worth it. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted February 5, 2008 Report Share Posted February 5, 2008 i must sy having that mityvac was grat but i took mine back after i got it working. although i got my break working they dont have as much pressure as i would like. but as long as the bike stops i guess it will do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.