HotCarl Posted February 1, 2008 Report Share Posted February 1, 2008 just put a round sticker over their logo. a small one that says "I hate Flatbillers" That way if anyone gets down low enough to read it you can kick them in the ass. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 2, 2008 Author Report Share Posted February 2, 2008 just put a round sticker over their logo. a small one that says "I hate Flatbillers" That way if anyone gets down low enough to read it you can kick them in the ass. Yeah, but now I kind of don't want to buy anything from Hardkor after the asshole email response they sent me. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 6, 2008 Author Report Share Posted February 6, 2008 Does anyone else have any hub ideas? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted February 6, 2008 Report Share Posted February 6, 2008 I have a boss sprocket hub out back, lsr brake hub, and boss racing outer hubs on my black bike. Love the design of them. I have no idea where to get them new, I always get a used set of thm off planetsand or ebay. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 7, 2008 Author Report Share Posted February 7, 2008 I have a boss sprocket hub out back, lsr brake hub, and boss racing outer hubs on my black bike. Love the design of them. I have no idea where to get them new, I always get a used set of thm off planetsand or ebay. What do you have on the front of your bike? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted February 7, 2008 Report Share Posted February 7, 2008 What do you have on the front of your bike? Just the ol plain jane stockers. Nothing fancy up front. Yet. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 8, 2008 Author Report Share Posted February 8, 2008 Just the ol plain jane stockers. Nothing fancy up front. Yet. That's sad............. :laugh: Quote Link to comment Share on other sites More sharing options...
Wildcardracing Posted February 9, 2008 Report Share Posted February 9, 2008 Personally I like the looks of the RPM's better, but I would just have someone chuck that cap up on a lathe and machine their logo off and leave the end of the cap machine finish, I think it would look sweet! :thumbsup: Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 9, 2008 Author Report Share Posted February 9, 2008 Personally I like the looks of the RPM's better, but I would just have someone chuck that cap up on a lathe and machine their logo off and leave the end of the cap machine finish, I think it would look sweet! :thumbsup: I can put the things up on a lathe, but if I wanted them anodized, that would ruin that.............. I could porbably just make my own caps too, but I am kind of lazy at the moment. :biggrin: Quote Link to comment Share on other sites More sharing options...
racer Posted February 9, 2008 Report Share Posted February 9, 2008 I can put the things up on a lathe, but if I wanted them anodized, that would ruin that.............. I could porbably just make my own caps too, but I am kind of lazy at the moment. :biggrin: Mar, I wouldn't mind trying my hand at some hub covers. PM if youre interested. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 10, 2008 Author Report Share Posted February 10, 2008 Mar, I wouldn't mind trying my hand at some hub covers. PM if youre interested. If your serious about it, I will buy a set from Hardkor, model the cap, and give you prints of what I need. :geek: Quote Link to comment Share on other sites More sharing options...
racer Posted February 11, 2008 Report Share Posted February 11, 2008 If your serious about it, I will buy a set from Hardkor, model the cap, and give you prints of what I need. :geek: I don't know about that. If there was something on their design I couldn't fully reproduce I would feel pretty bad. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 11, 2008 Author Report Share Posted February 11, 2008 I don't know about that. If there was something on their design I couldn't fully reproduce I would feel pretty bad. It's just a cap...............that I will design. So whatever I do will be able to be easily turned on a manual lathe out of some round bar...........not fancy spinning or anything like that. :geek: Quote Link to comment Share on other sites More sharing options...
racer Posted February 11, 2008 Report Share Posted February 11, 2008 What, no spinners? ya, I'll do it. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 11, 2008 Author Report Share Posted February 11, 2008 What, no spinners? ya, I'll do it. Coo. I'll get the hubs ordered this week and I'll doodle up a design for the caps some time in the next few weeks (I have to work on my taxes before I can get too wound up on this project, that and I have a couple week long business trip to Phoenix starting on the 18th). Beyond that, what do you have access for as far as machines? I would like to know this so that I can design the cap to be as easily made by you as possible. :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.