Troubledsol Posted January 17, 2008 Report Share Posted January 17, 2008 Okay I searched though 30+ pages and didnt find a good answer so here we go I recently purchased a set of LSR +2 +1 arms and the joints and alright but I need to ream the spindles what is the correct size taper reamer I will need to use What are these ball joints I have read I can use 1 ton chevy tie rod ends or 79 Ford Contour something is there any truth to this if so that awesome to go get them easily if they go bad Last thing can I run YFZ spindles I read that it will make me a bit wider and I want them for the better brakes but isnt the angle for the ball joints different Thanks Quote Link to comment Share on other sites More sharing options...
Lepew Posted January 18, 2008 Report Share Posted January 18, 2008 You can purchase aftermarket ball joints for about $25 each that will fit you a-arms and not require you to ruin a good set of spindles. I think Lonestar sells them, checkout their website and call them to make sure. They were not always available. YFZ spindles are different they may work but probably not right. Quote Link to comment Share on other sites More sharing options...
Troubledsol Posted January 18, 2008 Author Report Share Posted January 18, 2008 I just didnt want to drop any more money if I didnt have to Anyone else have any ideas of info Quote Link to comment Share on other sites More sharing options...
Wagonz Posted January 19, 2008 Report Share Posted January 19, 2008 i have LSR 2+1s and i tried using yfz spindles and they don't work because of the different angles of them which results in less travel. I have yfz calipers and master cylinder and it works good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.