bada450r Posted January 11, 2008 Report Share Posted January 11, 2008 ok so i want to build a 10 mil mini.the problem is that i was going to buy everything new the total cost of that would have been about 4500 to 5000 bucks.its alot of cabage right.so looking thru the classifieds on ps i found this http://www.planetsand.com/forums/ubbthread...3830#Post793830 what i want to build.......and a good price the only thing that i don't like is that the cylinders are only a 72 bore[but in talking to lou he said is no problem resleaving the cylinders to a 75 or 77 bore$$$$$$$$] which is what i wanted to build,i also talked to eric at wk and he said that those cylinders put out some serious power so ill run them on that bore size until i have to resleave............ my problem is that my builder lynn at lc performence does some pretty dam good work[asked steve aka socalin]and i just dont want to buy junk,and get stuck with some bullshit.what the hell do i do guys? i have to send payment tomorrow night 1/12/2008.the upside to all this is that ill save myself abot 2000 bucks,and the guy that has this cylinders sounds like a really good guy.any input/help would be apriciated.thanks. :shoothead: :shoothead: :shrug: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 11, 2008 Report Share Posted January 11, 2008 I've wanted to build a twister motor for some time, I think I'm gonna build a 10 mil DM next, however.... for the price, I don't think you could go wrong on those... Don't worry about the two ass clowns at the bottom of the post, I already PM'd the seller about them. They're from the middle east and they're scammers... I went round and round with banshee505 about my carbs a while back, saved my PMs on PS.... I'd pick that setup up...especially to save 2Gs. What kind of build did you have before? I'm sure Lyn @ LC will appreciate you getting the best bang for your buck....and maybe once Louie resleeves them...Lyn could port on 'em for you!! Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted January 11, 2008 Report Share Posted January 11, 2008 For what it is worth... I am building a 10mil 75bore twister mini this winter as well. I saw a 14mil 76 bore mini that one of the guys at our local track built. I knew when I saw that bike run I had to have one!!!! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 11, 2008 Report Share Posted January 11, 2008 Snomo quad and mini twister? Send some of that money my way Daddy Warbucks.... I'll be looking forward to this season big time, Roger...can't wait. I think with everyone's help, including yours, my first season on alky was a pretty good one... Sorry to get off topic Bada... Quote Link to comment Share on other sites More sharing options...
bada450r Posted January 11, 2008 Author Report Share Posted January 11, 2008 421 cub is what i had.......i dont think i want to resleeve the cylinders just yet i want to see how they run on that size bore.also i know eric at white knuckle can build a motor so imight just hae him take a look at this cylinders and port match me some cases, since techanaclly this are his cylinders.thanks. Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted January 11, 2008 Report Share Posted January 11, 2008 Snomo quad and mini twister? Send some of that money my way Daddy Warbucks.... I'll be looking forward to this season big time, Roger...can't wait. I think with everyone's help, including yours, my first season on alky was a pretty good one... Sorry to get off topic Bada... I'm gonna try to get the snomo quad done this year....but the twister will be my main focus. I just have this thing.......I wanna run in the 3's with a banshee based set up. It's been a goal for a while, and I cannot give up now!!!! Now I just need to sell the baby cheetah!!!! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 11, 2008 Report Share Posted January 11, 2008 Simple, put a 20 shot on and let Dan Jockey.....LOL... My goal is 3.99999 too as well Roger...gonna be tough for old fatty, but I think it can be done. Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted January 11, 2008 Report Share Posted January 11, 2008 Bada I would not resleeve perfectly good cylinders. You will pick up such a small amount, it's just not worth it!!!! Spend the money on some good portwork, Eric does good work, you will love this set up!!! Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted January 11, 2008 Report Share Posted January 11, 2008 Simple, put a 20 shot on and let Dan Jockey.....LOL...My goal is 3.99999 too as well Roger...gonna be tough for old fatty, but I think it can be done. I wanna do it with me on the bike. Hell I think with some seat time last year, Dan would have gone in the 3's with no problem!!! I have gone 4.002 with 20 shot on my old 421 cub........sooo close yet so far!!! Quote Link to comment Share on other sites More sharing options...
shanYE west Posted January 11, 2008 Report Share Posted January 11, 2008 (edited) I'm hoping to get into the 3's myself this year.. :biggrin: It's gonna be cut throat out there this year between us!! (all in fun ofcourse) I'll buy a 6-pack for the first guy to break into the 3's!! :biggrin: but only us 5 are in on it.. lol sorry for the hi-jacking again.. Edited January 11, 2008 by Fouledout421 Quote Link to comment Share on other sites More sharing options...
alcoholbanshee Posted January 11, 2008 Report Share Posted January 11, 2008 I'm hoping to get into the 3's myself this year.. :biggrin: It's gonna be cut throat out there this year between us!! (all in fun ofcourse) I'll buy a 6-pack for the first guy to break into the 3's!! :biggrin: but only us 5 are in on it.. lol sorry for the hi-jacking again.. Thats a good bet.......The 4 that don't win each buy the winner a sixxer!!!! I'm in!!!!! Gotta ride our own bikes though!!! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted January 11, 2008 Report Share Posted January 11, 2008 Sounds like a plan to me.... Of course, we have to sit around after the race and share.... Quote Link to comment Share on other sites More sharing options...
bada450r Posted January 12, 2008 Author Report Share Posted January 12, 2008 just talked to lc performance and he had nothing bad to say about WK and lc[lynn]tought that those twister cylinders were a good deal,and he also said not to pass on a good deal......on another note i dont worry to much about hi-jack threads thats what the foums are for passing information...again thanks for the input and i guess i'am in on building a mini twister........... Quote Link to comment Share on other sites More sharing options...
KSbanshee Posted January 15, 2008 Report Share Posted January 15, 2008 My 76 bore 10 mil mini is a runner.I think you will like the setup!! Quote Link to comment Share on other sites More sharing options...
Brady080 Posted January 20, 2008 Report Share Posted January 20, 2008 ok so i want to build a 10 mil mini.the problem is that i was going to buy everything new the total cost of that would have been about 4500 to 5000 bucks.its alot of cabage right.so looking thru the classifieds on ps i found thishttp://www.planetsand.com/forums/ubbthread...3830#Post793830 what i want to build.......and a good price the only thing that i don't like is that the cylinders are only a 72 bore[but in talking to lou he said is no problem resleaving the cylinders to a 75 or 77 bore$$$$$$$$] which is what i wanted to build,i also talked to eric at wk and he said that those cylinders put out some serious power so ill run them on that bore size until i have to resleave............ my problem is that my builder lynn at lc performence does some pretty dam good work[asked steve aka socalin]and i just dont want to buy junk,and get stuck with some bullshit.what the hell do i do guys? i have to send payment tomorrow night 1/12/2008.the upside to all this is that ill save myself abot 2000 bucks,and the guy that has this cylinders sounds like a really good guy.any input/help would be apriciated.thanks. :shoothead: :shoothead: :shrug: http://www.planetsand.com/forums/ubbthread...9761#Post779761 ready to go Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.