DMAN94 Posted January 10, 2008 Report Share Posted January 10, 2008 chrome +1 +2 lsr a-arms with dual work shocks w/rez-set for 160 lb rider - 500.00 +shipping (will need 2 new boots, ball joints are good. includes tie rods and i will include stock hubs and brake calipers. bolt on and go. do have stainless steel brakes and clamps for additional $40.00 -1 5/8 stock swingarm modified for round house/comes with rad carrier, power coated (looks like chrome) - 220.00 shipped lsr +2 axel with nut- 150.00 shipped brand new +1 lsr steering stem with anti vibe ---200.00 +shipping douglas rear beadlocks/one side, not dual---150.00 +shipping motor, ported polished, bored 20 over. adjustable ricky stator timing plate. cases are matched. starts first, second kick. the chain did break the case, but didn't crack it. just removed the serial #. i have the piece still. will need a new clucth basket but can be used as is. on the holeshot when sitting at a high rev she starts to grab. i was told it was the basket. didn't take it apart yet. i will do a compression test before selling. 650.00 + shipping, will include v-force reeds and modfied stock carbs. milled etc. paul turner mid pipes with fat boys--one pipe has a dent in the bottom, part that hangs over frame. 220.00 +shipping, will include alum. clamps and hangers silver laker plastics, only a few months old and a few scratchs. 250 + shipping the frame has a crack in it, left side behind the motor. i do have a title and a brand new gusset kit. just haven't fixed it yet. i did remove the stock air box brackets last time i power coated it. 150+ shipping (includes gusset kit which is 90.00) front quad rock rims - 100.00 shipped. i will not part this out unless i can sell at least 75-90% of parts. i do not want to have half a bike sitting around. i would just take my time fixing it back up. i just purchased an ltr450 and don't need 2 bikes so i figured i would see what the interest would be. if i can part it out i will. i'll keep this post for a week. if interested please email me at carverk@bellsouth.net with your phone #. i will contact you and send picks of everything. i owned this bike since 94. Quote Link to comment Share on other sites More sharing options...
Hilarious Posted January 10, 2008 Report Share Posted January 10, 2008 Where are you located? Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted January 11, 2008 Report Share Posted January 11, 2008 I might be interested in the LSR stem and maybe the PT mids depending on their shape. If you do decide to sell just send me a picture of the pipes and stem. Quote Link to comment Share on other sites More sharing options...
PhantomMs1 Posted January 11, 2008 Report Share Posted January 11, 2008 i'd be interested in the lsr a arms and shocks, and break lines, i would need to see pictures first. can you post them or do they need to be sent via e-mail? Quote Link to comment Share on other sites More sharing options...
BANKRUPT Posted January 11, 2008 Report Share Posted January 11, 2008 can I get some pics of those pipes? Quote Link to comment Share on other sites More sharing options...
DMAN94 Posted January 11, 2008 Author Report Share Posted January 11, 2008 im located in charlotte carolina. i will take pics of all the parts requested and send out later tonight. thanks Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted January 11, 2008 Report Share Posted January 11, 2008 Alright thanks man. It will be nice on shipping as well since were really close. Quote Link to comment Share on other sites More sharing options...
DMAN94 Posted January 13, 2008 Author Report Share Posted January 13, 2008 i sent pics out to the email address's i could find. please email me at carverk@bellsouth.net, in the subject tell me what part and i will email you pics back. i have them ready to go. thanks for looking Quote Link to comment Share on other sites More sharing options...
ADRENILINECRUSH Posted January 13, 2008 Report Share Posted January 13, 2008 Can you send me a picture of the axle. Im very interested and need one bad. Ready to paypal imediatly. Thanks Quote Link to comment Share on other sites More sharing options...
DMAN94 Posted January 14, 2008 Author Report Share Posted January 14, 2008 just a little more interest and i can part her out. any interest in the motor? just a few more things to go. i am hoping to part it this weekend if all goes well. email me at carverk@bellsouth.net for pics of what ever part thanks dennis Quote Link to comment Share on other sites More sharing options...
01CandyBlue Posted January 14, 2008 Report Share Posted January 14, 2008 I would be interested in the whole front end, send me pics to mdemco@gmail.com along with an idea of age and condition, thanks Quote Link to comment Share on other sites More sharing options...
DMAN94 Posted January 15, 2008 Author Report Share Posted January 15, 2008 Just a few things left, someone please make an offer on the motor, frame and swingarm and i will part this out. if i can get these 3 things sold i will have everything boxed up shipped over the weekend (shipped monday morning). swingarm is in real nice shape (roundhouse included) minus -1 5/8 almost new laker silver plastics also, just s few normal wear scratches frame, with tiltle and gusset kit also. i can have it welded and power coated if needed but it will cost more of course. i really don't want to put this back together again and i'm not far off of parting it out. i just can't have half a bike sitting around in the way. thanks dennis Quote Link to comment Share on other sites More sharing options...
01CandyBlue Posted January 15, 2008 Report Share Posted January 15, 2008 Did you send me pics on the front end? I have cash for it Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted January 16, 2008 Report Share Posted January 16, 2008 you got my email hit me up with some pics of the swinger i might just be interested. as for the motor man i know you might hate it but i see complete motors going for 6-800 on e-gay. Quote Link to comment Share on other sites More sharing options...
CFM Posted January 16, 2008 Report Share Posted January 16, 2008 Since you are so close, (I'm 5 miles from the speedway) I maight be interested in Frame Rear sprocket hub Rear brake hub Stock stem if you have it Dogbone Rear hubs Motor mounts Stock carrier if you have Eastcoast, if you get that stem, I'll buy your stocker.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.