TexasBansheeMan Posted December 29, 2007 Report Share Posted December 29, 2007 I just got my motor back together and was ready to fire it up. started kicking Lights come on with each kick i got spark. A lil choke and Whamo it fires right up I rev it a few times and shut it off something dont feel right. I already had the stator cover off so i just looked at the rotor I got a small chip on each of the pads leading edge. The pick up came loose and touched the rotor. The electrode on the pick up is chewed a lil. So I try to clean it up with some good old files, put it back together and now NO SPARK. Did I short out the coil or did my pick up just get trashed? I need help guys I got 4 days off and I wanna ride! Quote Link to comment Share on other sites More sharing options...
Washburn Posted December 29, 2007 Report Share Posted December 29, 2007 Make sure your gapped rite on the pickup and if there are any bare wires solder them together. Im bad with the Banshees electrical system but thats what I would look at. Quote Link to comment Share on other sites More sharing options...
csrmel Posted December 29, 2007 Report Share Posted December 29, 2007 the rotor? you mean the flywheel? is the flywheel damaged at all? each little metal tab on the flywheel needs to be in good condition. there are 2 tabs, spaced 180 degrees apart. the pick up sensor is a pretty precise instrument. did you gap it corectly to the flywheel? if the pick up is damaged you probably wont get a spark, as that is the device which sends a signal to the cdi to power the coil. Quote Link to comment Share on other sites More sharing options...
spurdy Posted December 29, 2007 Report Share Posted December 29, 2007 I just got my motor back together and was ready to fire it up. started kicking Lights come on with each kick i got spark. A lil choke and Whamo it fires right up I rev it a few times and shut it off something dont feel right. I already had the stator cover off so i just looked at the rotor I got a small chip on each of the pads leading edge. The pick up came loose and touched the rotor. The electrode on the pick up is chewed a lil. So I try to clean it up with some good old files, put it back together and now NO SPARK. Did I short out the coil or did my pick up just get trashed? I need help guys I got 4 days off and I wanna ride! I would guess it is the pick up or the CDI. The pick up sends a trigger to the CDI. The CDI then sends a low voltage high current signal to the coil which steps up the voltage to spark plugs. Correct me if I am wrong but I think this is accurate. If the pick up shorted out it could be bad and at worst could have shorted the input to the CDI. Coil should be fine. Best o luck! Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 29, 2007 Author Report Share Posted December 29, 2007 yes the flywheel. The pick up is kinda fuggly I am so pissed! The gap should be bout the thicknessof a business card correct? Any one got one Near Houston? I will drive to get it! Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 29, 2007 Author Report Share Posted December 29, 2007 GUYS I NEED HELP!! ANYONE HAVE THIS PART WITHIN 250 miles of houston? I need the pickup amd the flywheel Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 29, 2007 Author Report Share Posted December 29, 2007 How Far should I set the Gap? I just went and stole my bro's. I gotta ride this puppy! SOMEONE PLEASE!!!!!! Quote Link to comment Share on other sites More sharing options...
Bobby Banshee Posted December 29, 2007 Report Share Posted December 29, 2007 How Far should I set the Gap? I just went and stole my bro's. I gotta ride this puppy! SOMEONE PLEASE!!!!!! I have a new ricky stator 200 watt in the box i paided 180 for. I'll take 150 if interested. Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 29, 2007 Author Report Share Posted December 29, 2007 ^^^^Pm Sent.^^^^ What should The GAP be guy's? Quote Link to comment Share on other sites More sharing options...
FireHead Posted December 30, 2007 Report Share Posted December 30, 2007 ^^^^Pm Sent.^^^^What should The GAP be guy's? .019" Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 30, 2007 Author Report Share Posted December 30, 2007 I cant find my gage. Rough est. Beer box thickness ? It is a little more than the business card. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted December 30, 2007 Report Share Posted December 30, 2007 I just got my motor back together and was ready to fire it up. started kicking Lights come on with each kick i got spark. A lil choke and Whamo it fires right up I rev it a few times and shut it off something dont feel right. I already had the stator cover off so i just looked at the rotor I got a small chip on each of the pads leading edge. The pick up came loose and touched the rotor. The electrode on the pick up is chewed a lil. So I try to clean it up with some good old files, put it back together and now NO SPARK. Did I short out the coil or did my pick up just get trashed? I need help guys I got 4 days off and I wanna ride! You better quit looking at the brakes and check the flywheel then. Sorry, I couldn't resist. :biggrin: Quote Link to comment Share on other sites More sharing options...
TexasBansheeMan Posted December 30, 2007 Author Report Share Posted December 30, 2007 No brakes are NEW kevlar 0 miles. :sad: I am so pissed! Got in a hurry and it BIT me in the ASS! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.