Jump to content

+6 swingarm setup and Dual feed pingel


Recommended Posts

welp this is all that's left of my part out.

 

 

CFM +6 swingarm in very good shape!! Fresh bearings and seals and a good inner sleave. Comes with a adjustable rear strut. Probably has about a 1" or so of adjustment. Also Comes with the upp long chain slide that is like new! It is the type with bolts in it so you don't have to remove the swingarm to take it off. Also comes with a non oring chain. Basically everything needed for a +6 swap except a brake line. $200 shipped!

 

 

Old style dual feed pingel. Doesn't leak at the base but does leak slowly into the carbs. It wasn't a big deal i ran it how it was, but Pingel quoted me $18 to rebuild it.. $35 shipped.

Link to comment
Share on other sites

hey man, have any pics of that +6 for a fellow tennessee banshee rider? thanks

 

 

Just a couple with it still on the bike. I would give you a good deal if you decided you want it as shipping wouldn't be nearly as bad as others. Could do it for $175 shipped or $150 if you wanted to meet somewhere. photobucket's site is doing maintence right now so i can't host the pics. I will try again in a couple hours, otherwise i will do it after work tonight at around 5pm

 

 

 

badass i do not have a measurement on it. I keep the bike at my mom's place as i live in the middle of the city. I can get a measurement tonight for you if you like. I know it was made to level out a seat with a set of 20" rear tires. it was short enough to run directly to the swingarm and delete the dog bone or long enough to work in conjunction with the dog bone.

Edited by Lethaface
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...