Toybreaker Posted December 8, 2007 Report Share Posted December 8, 2007 (edited) I am Finally getting the Chassis together for my drag bike and want a narrow axle and both shorter and longer swingarms. What interchanges from a blaster to a banshee? I know the 2003 and later axle does. What about the carriers? Blaster parts are cheaper than banshee parts. That is a nice plus. thanks for your knowledge on this :thumbsup: Edited December 8, 2007 by Toybreaker Quote Link to comment Share on other sites More sharing options...
nunyabinness Posted December 8, 2007 Report Share Posted December 8, 2007 no the carrier does not swap. you can put a banshee carrier on a blaster but not the other way around. the parts on a blaster are not really worth a darn. i believe that the lower arms are the same on the blaster and banshee. but the upper arm is smaller. also it has a different ball joint in the upper a-arm. it really isn't worth the hassle of trying to change it out. Quote Link to comment Share on other sites More sharing options...
Toybreaker Posted December 8, 2007 Author Report Share Posted December 8, 2007 Narrow track is better for drag racing and a blaster is much narrower than a Banshee. I just don't want to pay for a"banshee" price for a blaster sized part. An axle is an axle. If it comes down to tempering or strength i can heat treat and temper it myself to anywhere from 32 RC to 60 RC. Quote Link to comment Share on other sites More sharing options...
samc Posted December 9, 2007 Report Share Posted December 9, 2007 wheels, bars, shocks, thats all i can think of off the top of my head.. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted December 9, 2007 Report Share Posted December 9, 2007 Wrist pin berrings :biggrin: Quote Link to comment Share on other sites More sharing options...
nunyabinness Posted December 9, 2007 Report Share Posted December 9, 2007 Narrow track is better for drag racing and a blaster is much narrower than a Banshee. I just don't want to pay for a"banshee" price for a blaster sized part. An axle is an axle. If it comes down to tempering or strength i can heat treat and temper it myself to anywhere from 32 RC to 60 RC. i understand why you are wanting to do it. i'm just saying that you wouldn't get much difference in the a-arms. at most i think you would get about half an inch on each side. hardly worth the effort. i was not meaning to demean your abilities. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.