Lethaface Posted November 8, 2007 Report Share Posted November 8, 2007 (edited) Other thread is a bit to cluttered. Really need to get this stuff gone, going to buy my mustang sunday so i need money for the 347 stroker kit lol.. Accepting best offers on the rest of this stuff.. Thanks, Jeremy 3. Pro Design Cool Head shell. No domes $110 6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100 10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp on K&N filters and a Dual Feed Pingel and dave moore super jets. $475 14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30 15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes with a +6 stainless steel brake line. $175 16. Polished axle $70 18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40 19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a trail bike. $300 20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it. Comes with pan and good working latch! Paid 110 for the work alone. $120 22. Front and rear hubs. Good bearings and seals in the front! $70 23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front brake Lever. $150 24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50 26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350 27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30 28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50 29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25 31. Polished stock kicker. No clanging or noises its still tight!.. $50 32. Stock Thumb throttle with polished Cap. Harness still attatched $35 33. Chrome Rear brake Lever and Shifter. VERY NICE! $60 34. KBC gunslinger helmet size XL. very good shape. $120 Edited November 8, 2007 by Lethaface Quote Link to comment Share on other sites More sharing options...
DMAN94 Posted November 8, 2007 Report Share Posted November 8, 2007 Other thread is a bit to cluttered. Really need to get this stuff gone, going to buy my mustang sunday so i need money for the 347 stroker kit lol.. Accepting best offers on the rest of this stuff.. Thanks, Jeremy 3. Pro Design Cool Head shell. No domes $110 6. Flow Tech 12oz Lightened Flywheel Good shape LOOKS NEW! $100 10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp on K&N filters and a Dual Feed Pingel and dave moore super jets. $475 14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30 15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes with a +6 stainless steel brake line. $175 16. Polished axle $70 18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40 19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a trail bike. $300 20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it. Comes with pan and good working latch! Paid 110 for the work alone. $120 22. Front and rear hubs. Good bearings and seals in the front! $70 23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front brake Lever. $150 24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50 26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350 27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30 28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50 29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25 31. Polished stock kicker. No clanging or noises its still tight!.. $50 32. Stock Thumb throttle with polished Cap. Harness still attatched $35 33. Chrome Rear brake Lever and Shifter. VERY NICE! $60 34. KBC gunslinger helmet size XL. very good shape. $120 Interested in the rear spocket hub and the shifter/brake lever. email me at carverk@bellsouth.net thanks Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted November 8, 2007 Report Share Posted November 8, 2007 Will you sell the pingel valve? How much? Do you have a pic? thanks Quote Link to comment Share on other sites More sharing options...
RUDEDAWG Posted November 8, 2007 Report Share Posted November 8, 2007 Flywheel MINE! Thanks Jeremy! Quote Link to comment Share on other sites More sharing options...
Handyman Posted November 8, 2007 Report Share Posted November 8, 2007 What's the info on the polished axle...stock?? aftermarket?? pics... Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 8, 2007 Author Report Share Posted November 8, 2007 It's just a stocker i put alot of time into.. I'll try and get you a pic by tommorow the rest of the bike is over at my mom's place in her shed. Jeremy Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 8, 2007 Author Report Share Posted November 8, 2007 3. Pro Design Cool Head shell. No domes $110 10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp on K&N filters and a Dual Feed Pingel and dave moore super jets. $475 14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30 15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes with a +6 stainless steel brake line. $175 16. Polished axle $70 18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40 19. Complete set of Special Edition Yellow Plastics. Comes with a one of a kind Texas Chainsaw masacre Graphic Kit. Also comes with a custom made Chainsaw grille. This is the only Set of graphics and grille like this in the country. Plastics are in very good shape.. Not scratched up and beat like a trail bike. $300 20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it. Comes with pan and good working latch! Paid 110 for the work alone. $120 22. Front and rear hubs. Good bearings and seals in the front! $70 23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front brake Lever. $150 24. MSR Adjust on the fly clutch lever. Comes with a brand new MSR terminator Ceramic clutch cable. $50 26. Complete set of drag wheels and tires. Will come with a set of ITP rear wheels with Hoosiers and a set of 4" douglas front wheels with drag tires. Very nice wheels not bent or dented up. $350 27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30 28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50 29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25 31. Polished stock kicker. No clanging or noises its still tight!.. $50 32. Stock Thumb throttle with polished Cap. Harness still attatched $35 33. Chrome Rear brake Lever and Shifter. VERY NICE! $60 34. KBC gunslinger helmet size XL. very good shape. $120 Quote Link to comment Share on other sites More sharing options...
Handyman Posted November 9, 2007 Report Share Posted November 9, 2007 It's just a stocker i put alot of time into.. I'll try and get you a pic by tommorow the rest of the bike is over at my mom's place in her shed. Jeremy Jeremy...How ar ethe spines on the axle...forgot to ask that last night...also if youhave any pics of it...Found out last night that mine is bent...damn tire wobbles Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 9, 2007 Author Report Share Posted November 9, 2007 The splines are very good.. It is off a 04 so it is fairly in new condition.. The whole family is fighting off a stomach bug right now but i'll try and get you a pic by saturday if you need one.. Here is a pic from a little bit of distance. It shines a little better than the pic shows. Quote Link to comment Share on other sites More sharing options...
Handyman Posted November 9, 2007 Report Share Posted November 9, 2007 The splines are very good.. It is off a 04 so it is fairly in new condition.. The whole family is fighting off a stomach bug right now but i'll try and get you a pic by saturday if you need one.. Here is a pic from a little bit of distance. It shines a little better than the pic shows. Oh damn that sucks.. Hope eeryone gets better soon... Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 13, 2007 Author Report Share Posted November 13, 2007 (edited) back on the scene with a gangsta lean here is whats left guys.. Really need this stuff to be gone within the next two weeks.. Will accept reasonable offers but i'm somewhat firm. 3. Pro Design Cool Head shell. No domes $110 10. 39MM PWK's. Comes with all fuel lines, Mikuni fuel pump, Modded bowls for more fuel, Clamp on K&N filters and a Dual Feed Pingel and dave moore super jets. $475 14. Billet Case saver. A little bit of material was removed to fit a 16 tooth front sprocket. $30 15. CFM +6 swingarm. Good bearings! Comes with a chain and UPP long chain slide. Also comes with a +6 stainless steel brake line. $175 16. Polished axle $70 18. Rear sprocket carrier and brand new JT 40 tooth Chrome Rear Sprocket. $40 20. Custom made seat. Was profesionally cut then had $25 a square yard vinyl stretched over it. Comes with pan and good working latch! Paid 110 for the work alone. $120 22. Front and rear hubs. Good bearings and seals in the front! $70 23. Complete break system. Comes with front and rear calipers, master cylinders and MSR front brake Lever. $150 27. Motor mounts and motor mount bolts. This will be upper and lower strut mounts. $30 28. Complete banshee bolt set. Most have been replaced with stainless steel allen head bolts. $50 29. Billet Handle bar clamp from MODQUAD. Very nice looking! no dents or dings. $25 31. Polished stock kicker. No clanging or noises its still tight!.. $50 32. Stock Thumb throttle with polished Cap. Harness still attatched $35 33. Chrome Rear brake Lever and Shifter. VERY NICE! $60 34. KBC gunslinger helmet size XL. very good shape. $120 all parts off my very clean '99 shee. __________________ Edited November 13, 2007 by Lethaface Quote Link to comment Share on other sites More sharing options...
Canadarider Posted November 13, 2007 Report Share Posted November 13, 2007 Pm'ed u last week about the head still no pm back Quote Link to comment Share on other sites More sharing options...
bansh4mil Posted November 15, 2007 Report Share Posted November 15, 2007 Thanks for the exhaust. Thought they were coming with the mounts though? Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 15, 2007 Author Report Share Posted November 15, 2007 Thanks for the exhaust. Thought they were coming with the mounts though? They are in the box in a zip lock bag. They are probably down in the bottom of the peanuts Quote Link to comment Share on other sites More sharing options...
bansh4mil Posted November 15, 2007 Report Share Posted November 15, 2007 I'll look again thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.