twinrock Posted November 6, 2007 Report Share Posted November 6, 2007 can u get a cool head set up to run bigger then 68mm bore..my barrels have potential for 72mm thanks.. Quote Link to comment Share on other sites More sharing options...
rubberneck Posted November 7, 2007 Report Share Posted November 7, 2007 Are you running the supercub cylinders? If so, I know i have seen Noss machine post up on here that he has done some supercub domes. Not sure if they are used in the "standard" cool head or if they require a special head, but Im sure he could tell you. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted November 7, 2007 Report Share Posted November 7, 2007 the super cub uses a different head than the regular noss head. the head studs are moved to make room for the bigger bore. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted November 8, 2007 Report Share Posted November 8, 2007 I'm not 100% sure but I think Trinity's heads go bigger then 68mm. Quote Link to comment Share on other sites More sharing options...
06BaNsHeE Posted November 8, 2007 Report Share Posted November 8, 2007 Nate McCoy sells noss heads for the supercub.The ones on noss machines site that say "The real McCoy" on em Quote Link to comment Share on other sites More sharing options...
dlnoss Posted November 8, 2007 Report Share Posted November 8, 2007 Nate McCoy sells noss heads for the supercub.The ones on noss machines site that say "The real McCoy" on em I have a few Super Cub heads left if that's the cylinders you have. Quote Link to comment Share on other sites More sharing options...
Lethaface Posted November 8, 2007 Report Share Posted November 8, 2007 The stock head you have is has been milled and rechambered twin. no he has a vito's BB setup in a set of stock cylinders. There is a ton of work in those cylinders, hope he can find a head for it.. Quote Link to comment Share on other sites More sharing options...
jay793 Posted November 12, 2007 Report Share Posted November 12, 2007 I had jeff at FAST cut my domes for a coolhead to a 69mm so yes it can be done. What size are you looking for? Quote Link to comment Share on other sites More sharing options...
twinrock Posted December 19, 2007 Author Report Share Posted December 19, 2007 sorry guys been away for a bit... yes as leatherface says the standard head has beed machined to suit..i was just think while im doin the whole up grade thing why not up grade the head as well..but just not to informed on the whole thing..as as usual no one over here..australia..now anything about that stuff..banshee related..i would need about 68-69 mm..is it jast a matter of having an enginner sort it out for me..wouldin it alter my compression.. I had jeff at FAST cut my domes for a coolhead to a 69mm so yes it can be done. What size are you looking for? Quote Link to comment Share on other sites More sharing options...
bombedbanshee06 Posted December 24, 2007 Report Share Posted December 24, 2007 sorry guys been away for a bit...yes as leatherface says the standard head has beed machined to suit..i was just think while im doin the whole up grade thing why not up grade the head as well..but just not to informed on the whole thing..as as usual no one over here..australia..now anything about that stuff..banshee related..i would need about 68-69 mm..is it jast a matter of having an enginner sort it out for me..wouldin it alter my compression.. http://www.explosiveracing.com.au/ EXPLOSIVE RACING Unit 3 /17 Stanley St Peakhurst 2210 Sydney N.S.W Phone: 02 95338242 Fax: 02 95338234 Mobile: 0407 0000 98 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.