jayzx10r Posted November 4, 2007 Report Share Posted November 4, 2007 I was thinking of cleaning up my front brake line run (currently zip tied to my tie rods!!) and was wondering what most people do to secure their brake lines to their suspension. Should I run 2 on each side? Connect to upper or lower arm? Which side...front or rear? What do you do to deal with the varying length created by turning? I only ride in sand so if that makes a difference in your recommendation...there it is!! Thanks, Jay. Quote Link to comment Share on other sites More sharing options...
racer Posted November 4, 2007 Report Share Posted November 4, 2007 mine are ziptied to the upper arm, on the rear section. that keeps them tight and out of the way. are for the length change, between the last zip and the caliper itself, i made a little s-section. it was kinda funny looking at first, but now that they have been that way for two years they took on a more natural shape, and look kinda neat I think. Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted November 4, 2007 Report Share Posted November 4, 2007 Yea I think that's the best place to put them but also prefer billet clamps. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted November 5, 2007 Report Share Posted November 5, 2007 i bought 2 sets soi will have 2 clamps per. im putting mine on the uppers. Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted November 5, 2007 Report Share Posted November 5, 2007 Yeah, I got 2 sets of billet clamps on my upper rods, I put them on the front of the bike, I don't know why though, I'll probably put them on the back of the arm sooner or later. Quote Link to comment Share on other sites More sharing options...
racer Posted November 5, 2007 Report Share Posted November 5, 2007 I want to do my bike in SS hardline. It would be expensive, but fun to know how to do, and the school has all the tools I needs. Quote Link to comment Share on other sites More sharing options...
BaNsHeeJuNkEy Posted November 5, 2007 Report Share Posted November 5, 2007 Yeah, I got 2 sets of billet clamps on my upper rods, I put them on the front of the bike, I don't know why though, I'll probably put them on the back of the arm sooner or later. how long are your brake lines. i have streamlines plus 2 and they like just make it to my caliper. they woudl never make it to the front of my a-arms. does anyone elsa have the same lines as me and if so how much left to you have near your caliper and master. as for my lines i have them zip tied to my upper a-arms for now. sooner or later i will have billet ones. Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted November 5, 2007 Report Share Posted November 5, 2007 Whew, I'm not sure, they are fuckin' long though. I bought them used off Ellison a while back. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted November 5, 2007 Report Share Posted November 5, 2007 i had some ss lines made that tie into my stock hard lines. jayz750 told me about a place near where we live. cost me like 50 bucks and that was for all the connectors and everything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.