sheerider1026 Posted October 30, 2007 Report Share Posted October 30, 2007 ok. i ride my shee in the woods/trails a lot.. i do love to jump on a backyard dragstrip and run the hell out of it.. i am wanting to port a set of stock cyl's but not sure what kind of port job would be best for me.. i really love a snappy motor that still pulls hard on top.. i have cubs right now and i need more mid and lowend power.. i like the powerband to hit when i snap the throttle open instantly.. any help?? i have t5's vforce, head, 33 pwks. i heard that jim at passion racing is the best? Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted October 30, 2007 Report Share Posted October 30, 2007 Well Jim at Passion has my motor as we speak. I have heard good thtings so I gave him a shot. All i can tell you has of now Is that he is a really nice guy to deal with.. Give him a call, maybe you feel alittle bit more comfortable once you speak to him... Good luck.. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted October 30, 2007 Author Report Share Posted October 30, 2007 i have talked with him before.. thats where my carbs came from.. also bought that stainless throttle cable. but i am thinking about the 2n1 intake.. know anything about it? Quote Link to comment Share on other sites More sharing options...
Coupelx Posted October 30, 2007 Report Share Posted October 30, 2007 i think the 2n1 would really choke it Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 30, 2007 Report Share Posted October 30, 2007 stay away from the 2 into 1.. youll make more power with dual carbs. try FAST racing or Redline racing. i highly recommend both.. Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted October 30, 2007 Report Share Posted October 30, 2007 i have talked with him before.. thats where my carbs came from.. also bought that stainless throttle cable. but i am thinking about the 2n1 intake.. know anything about it? Well what type of gains did you feel when you put the 33's on? also if you do decide to go with the 2into1 and want to get rid of those carbs send me a pm, I might be interested, my builder said that would be my next step once i get a feel for my new setup.. I was asking the same questions when I was ready for my build, and everyone pretty much said the same, there are so many good builders out there, call around and see who makes you fell comfortable and just go for it....good luck Quote Link to comment Share on other sites More sharing options...
shanYE west Posted October 30, 2007 Report Share Posted October 30, 2007 Jim is a good builder and a hell of a guy. Give him a call and he'll answer your questions and tell you what type of port work would best suit your needs. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 30, 2007 Report Share Posted October 30, 2007 Asking who is the best builder is like asking you what kind of beer you drink, who makes the best car/truck, and if you like blonde/brunettes/redheads (or...gulp...baldies) Call several builders, Jim @ Passion, Jeff @ Fast, Cameron @ K&T, Kim @ K&T, the list goes on. See who treats you the best, who answers your questions AND asks you the right ones, gives you a good price (remember, you get what you pay for) and make your decision from there. You're shorting yourself if you only call one builder...any one of those listed above or any other builder. That's like shopping for a new car and buying the first one you see on the lot without sitting or even looking at other cars.... Quote Link to comment Share on other sites More sharing options...
NYUK Posted October 30, 2007 Report Share Posted October 30, 2007 ALLPRO FROM MISSISSIPPI IS THE BEST! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 30, 2007 Report Share Posted October 30, 2007 I'm ratting you out to Andy... Quote Link to comment Share on other sites More sharing options...
06BaNsHeE Posted October 30, 2007 Report Share Posted October 30, 2007 What ever happen to GRR? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 30, 2007 Report Share Posted October 30, 2007 Andy got out because of his full time job getting in the way...more or less. Not enough time... Quote Link to comment Share on other sites More sharing options...
shanYE west Posted October 30, 2007 Report Share Posted October 30, 2007 Asking who is the best builder is like asking you what kind of beer you drink, who makes the best car/truck, and if you like blonde/brunettes/redheads (or...gulp...baldies) Call several builders, Jim @ Passion, Jeff @ Fast, Cameron @ K&T, Kim @ K&T, the list goes on. See who treats you the best, who answers your questions AND asks you the right ones, gives you a good price (remember, you get what you pay for) and make your decision from there. You're shorting yourself if you only call one builder...any one of those listed above or any other builder. That's like shopping for a new car and buying the first one you see on the lot without sitting or even looking at other cars.... I couldn't agree more! :thumbsup: Quote Link to comment Share on other sites More sharing options...
Washburn Posted October 30, 2007 Report Share Posted October 30, 2007 Also think of what kind of port job you want and who you think will be the best builder for your choice. Alot of/Most Banshee builders do 90% Dune/Drag bikes and thats not who I would pick to do say an MX Woods or GNCC Motor. Jim at Passion Racing however does it all and has more expirence than most thats fact. I would definatly want him to do my engine and Im sure he would build me a monster GNCC motor. He has over 150 engine combos. Ide recomend you to my guy Cody Buchanan of Buchanan Racing who builds GNCC MX/Woods/Play engines and has been compared to Eric Gorr by many people but he is so booked its not worth it unless you want to wait 4-5 months. Quote Link to comment Share on other sites More sharing options...
NYUK Posted October 30, 2007 Report Share Posted October 30, 2007 I'm ratting you out to Andy... andy would get the joke. he was around here for all pro. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.