Snopczynski Posted October 12, 2007 Report Share Posted October 12, 2007 Well I went down and picked up my dyno info today. I was wrong about rred spacers. Looks like on my bike they hurt the midrange and the top end. The blue run is with the spacers, the red run is without. Direct link Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 12, 2007 Author Report Share Posted October 12, 2007 (edited) Here is timing from 4 degrees advanced to 6 degrees advanced. Blue run is 4 degrees, red run is 6 degrees. Direct Link Edited October 12, 2007 by Snopczynski Quote Link to comment Share on other sites More sharing options...
HKIC Posted October 12, 2007 Report Share Posted October 12, 2007 :thumbsup: Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted October 12, 2007 Report Share Posted October 12, 2007 (edited) thats actually good info to know, thnx Snop althought with that small of an amount i wouldnt really make the claim that it adds power. Edited October 12, 2007 by Bansh-eman Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 12, 2007 Author Report Share Posted October 12, 2007 (edited) On which one? Reed spacers? Lets just say you never lost any when you dont put them on! Here is a run time scale. Blue run was with the spacers. Red and green were without, and both red and green runs were made within 14 seconds of each other. Got better as the bike warmed up. Direct Link Edited October 12, 2007 by Snopczynski Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted October 12, 2007 Report Share Posted October 12, 2007 (edited) ill still remain with they are ment to clear the clutch arm, and they just so happen to add .25 hp at max rpm cant really constitute the .25 as being made to make power :shrug: thnx for finding the info though we have been waiting for ever lol edit: hey you get free dyno runs right? if you do do use all the favor and set the boost bottle to rest so we can close the book on it Edited October 12, 2007 by Bansh-eman Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 12, 2007 Author Report Share Posted October 12, 2007 (edited) Well, I cant cause I have a 2 into 1 intake. I know that Kenny has tested the boost bottle and proved that it is a hoax. I can see if he will give me a file where he ran one then took it off. Now, we have the +4 to +6 timing advance runs on a run time scale. The 4 second runs are +4 timing and both were made within 20 seconds of each other. The 2 second time runs are +6 timing and were both made within 20 seconds of each other also. Direct Link Edited October 12, 2007 by Snopczynski Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted October 12, 2007 Report Share Posted October 12, 2007 Thanks Snopczynski Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted October 12, 2007 Report Share Posted October 12, 2007 yea see if he will fork over the boost bottle copy so we can lay that fuker to rest for the guys that are optimistic still Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 12, 2007 Author Report Share Posted October 12, 2007 Ok! :biggrin: Quote Link to comment Share on other sites More sharing options...
RIPRuck Posted October 12, 2007 Report Share Posted October 12, 2007 Good info there!! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 12, 2007 Report Share Posted October 12, 2007 Great info...and it makes perfect sense on the timing run as well. More timing will net you more power lower to mid-RPMs...but even two degrees didn't make the peak HP of the lesser setting. That's a pretty nice torque curve too, Snop. I'm hoping to get mine on a dyno in the next month or so... It will be a totally different graph.... Nothing, nothing...nothing, HOLY SHIT....nothing...nothing.... :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
RZBansheeMan Posted October 12, 2007 Report Share Posted October 12, 2007 Kinda curious to know if that was with a stock Banshee CDI box in cionjunction with a timing plate ? Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted October 12, 2007 Report Share Posted October 12, 2007 RZ, i want to say he uses a stock cdi but im not 100% on that Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted October 12, 2007 Author Report Share Posted October 12, 2007 Yes it was a stock cdi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.