Penny's Banshee Posted September 17, 2007 Report Share Posted September 17, 2007 im having some problems jetting my shee i have a stock motor t5's and kandN filter with outerwears and not filterbox top. what are my jetting options Quote Link to comment Share on other sites More sharing options...
sredish Posted September 17, 2007 Report Share Posted September 17, 2007 only options are lean, rich and right on! :happy: Put in some 300s, maybe 290s if your elevation is a little higher . Needle in the 4th clip and 27.5 pilots to start. Sometimes the T5s like a richer (30) pilot so keep that in mind. Quote Link to comment Share on other sites More sharing options...
dragbanshee Posted September 20, 2007 Report Share Posted September 20, 2007 im having some problems jetting my shee i have a stock motor t5's and kandN filter with outerwears and not filterbox top. what are my jetting options im at about 1000 asl and have basically same set up, i run 280s 4th notch rich & stock pilots airscrew 1 1/2 out & pro reeds, k&n with lid and like 8 one inch holes, runs great! GOOD LUCK. Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted September 20, 2007 Report Share Posted September 20, 2007 my shee runs pefect with 27.5 pilots. it's ported too. start with a rich main(300) then tune till it runs good. Everyones bike IS different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.