Bansheeman1121 Posted September 10, 2007 Report Share Posted September 10, 2007 This has been an ongoing problem thats finally gotton to me the right side always fouls out and is black left is always perfect tan wtf can this be just took the carbs apart nothin looks out place... Quote Link to comment Share on other sites More sharing options...
4stroker Posted September 10, 2007 Report Share Posted September 10, 2007 man i am no expert on jetting (currently having problems with my own lol) but if everything is put together properly (eg no air leaks, no blockages in the intake or carb etc) then just lean out the right side (by coming down in jet size and/or needle position) until the plugs look the same as each other. the cylinders will never run exactly the same as each other, especially if it has been ported, because someone with a die grinder will never get two cylinders IDENTICAL to each other! also man are the plugs the same?? ie the right plug isnt a colder plug (BR9ES or similar) is it? Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted September 10, 2007 Report Share Posted September 10, 2007 Are you loosing any trans fluid. Could be burning that oil if you had a bad crank seal. Quote Link to comment Share on other sites More sharing options...
letsgetthisdone Posted September 10, 2007 Report Share Posted September 10, 2007 i'm leaning towards bad right side crank seal.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.