Jump to content

HELP ASAP!


chevy7398

Recommended Posts

ok last thursday went to track to practice and about 5 laps in my throttle cable broke, she was and has always ran perfect, loaded her in the truck and came home. yesterday my new cable got here and i put it on today after work, i started it up and now my right hand cylinder is only firing once in about 15 20 sec and the left is smoking its ass off. the motor was totally rebuilt ( new crank, all seals and gaskets, top end, head , new vf3s, clutch ext..) and has ran like a top every weekend for about 4 5 months now. i have changed plugs, cleaned carbs twice, checked the reeds, cut my coil wires back a bit, switched plug wires back and forth, pulled my pipe off to see if there was oil in it due to cranks seal and still nothing. it is still doing the same thing and i cant figure it out, and yes the tors is long gone. everything is in right and been checked and checked and checked again. the first race of the season is sunday and i dont know what the problem with it anyone got any ideas, the tranny fluid is still full and as i said last time she was ran it ran perfect, this is the first problem ive had since i rebuilt her and it has appeared out of thim air, i also drained the gas and put new in PLEASE HELP!!!!

post-23715-1189220574.jpg

Link to comment
Share on other sites

ok guys whoever lives in NC and wants to come give me a quick kick in the butt so i dont forget to MAKE SURE I PUT THE SLIDES IN THE RIGHT CARBS again. 5 hours work for a 30 sec fix, man i feel smart now

rotflmao :thumbsup: :laugh:

that is funny shit right thear :laugh: :laugh:

Edited by chevrolet banshee
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...