Jump to content

My truck


kaotik1

Recommended Posts

Here is my truck and a list of whats done so far.

2003 awd with 38k black

Exterior-

Reflexxions cowl hood

carriage works billet grill powdercoated black chrome

Extang full tilt bed cover

factory bed liner

 

Brake and suspension-

Belltech lowering spindles up front

Belltech lowering leaf packs in the rear

Belltech nitro shocks

Bear Alumasports with 2pc front rotors up front

Bear Alumasport with one piece rotor in the rear

Earl's braided brake lines (5pc) kit

 

Interior-

Clarion Vrx935-VD DVD/mp3/cd player Flip out touch screen

JBL pb-1200.1 amplifier

Alpine Type-r 12 inch subwoofer with fiberglass enclosure no seat spacers

Playstation2 with wireless controller

 

Bolt-ons-

Revolution Raceworks Tune

K&N cold air intake powdercaoted black chrome

magnaflow catback dual in single out factory location (stainless)

ASM headers(long tube) heat treated titanium color

cross over pipe with high flow cats, to match up to the factory exhaust (heat treated black)

 

IMG_7067.JPG

http://northeastcoatings.net/tj/IMG_7056.JPG

http://northeastcoatings.net/tj/IMG_7057.JPG

http://northeastcoatings.net/tj/IMG_7059.JPG

http://northeastcoatings.net/tj/IMG_7060.JPG

http://northeastcoatings.net/tj/IMG_7061.JPG

http://northeastcoatings.net/tj/IMG_7062.JPG

http://northeastcoatings.net/tj/IMG_7063.JPG

http://northeastcoatings.net/tj/IMG_7064.JPG

http://northeastcoatings.net/tj/IMG_7065.JPG

http://northeastcoatings.net/tj/IMG_7066.JPG

http://northeastcoatings.net/tj/IMG_7068.JPG

http://northeastcoatings.net/tj/IMG_7069.JPG

http://northeastcoatings.net/tj/IMG_7070.JPG

Link to comment
Share on other sites

Thanks guys been hard up to this point, too many projects lack of time and funds. We all know that one! haha

 

This truck is a 4 door, the rears are suicide doors. Just not a club cab, those are denali's! Like this one, and since you all like the supra heres a sweet one.. The supra is for sale as well..

818470_118_full.jpg

818470_119_full.jpg

Link to comment
Share on other sites

Looks good other than the lowering and Hood, and wind/rain gaurds. Not digging that cover.

I like the bumper, is that custom or do they come like that?

 

The enclosure sounds nice got any pics of that?

Not really much to like if you remove all that stuff :laugh: I do not have pictures of the sub enclosure, hard to tell what it is anyhow, I carpeted it to look like the factory storage box.

Link to comment
Share on other sites

Not really much to like if you remove all that stuff :laugh: I do not have pictures of the sub enclosure, hard to tell what it is anyhow, I carpeted it to look like the factory storage box.

 

Ok so it's not exactly my style, but as long as you like it, the hood isn't that bad maybe it looks better than stock I don't know heh. Theres thigns I don't like about my truck too like all the stupid chrome in front. I'll bet you could fit the subs I want to put in my truck, I don't have the tools to fabricate a seat lift ofr my truck to fit them. backseat folds up and down, so there are latches on the rear wall that also have to be moved up... I can forward fire with a minor lift tot he front of the seat only, but I think someone would kick them on accident lol. I can't even fit Type-R's in mine in up or downfire, they are too deep. I put in some TC 1000's though....they get loud enough I suppose but the SQ is excelent.

 

I like your grill and stuff though if that counts!

Edited by Justintoxicated
Link to comment
Share on other sites

I realize my truck looks are not for everyone. If they were it would not be "MY" truck. So far I am pleased with the way it looks, at one point or another there were things I didn't like I fixed them and moved on. I tried several hoods before settling on this one, in person it looks better than the pictures.

 

My back seat the base lifts up just the same as you described, I wanted more than a 10" sub. I opted for the 12" the enclosure was a pain to build it had to have poly fill to trick the sub as well. I did not have to lift the seat base to make it fit either. There are a few companies out there that make boxes for these trucks to fit 12's without the seat being moved.

Link to comment
Share on other sites

I realize my truck looks are not for everyone. If they were it would not be "MY" truck. So far I am pleased with the way it looks, at one point or another there were things I didn't like I fixed them and moved on. I tried several hoods before settling on this one, in person it looks better than the pictures.

 

My back seat the base lifts up just the same as you described, I wanted more than a 10" sub. I opted for the 12" the enclosure was a pain to build it had to have poly fill to trick the sub as well. I did not have to lift the seat base to make it fit either. There are a few companies out there that make boxes for these trucks to fit 12's without the seat being moved.

 

I can't really easily fit a 12. I have sceen it done without the box sticking out, but the 12" they used, I'm thinking my 10's proabbyl hit harder. I have fill in my box, just for the 10's!

Link to comment
Share on other sites

  • 2 weeks later...

If the rear doors are suicide doors, why are the handles in the factory position? not near the drivers handle like actual suicide doors?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...