strokerace Posted September 3, 2007 Report Share Posted September 3, 2007 anyone ever had any trouble with dyna box losing its program or advancing timing to far Quote Link to comment Share on other sites More sharing options...
wesw Posted September 3, 2007 Report Share Posted September 3, 2007 is your custom programmed or just the stock curve that come with it. will say curve 3 will rattle plugs out on mine, all depends on your setup. im looking to get complete reprogramed with more knowledge than i knew before, only time will tell. Quote Link to comment Share on other sites More sharing options...
strokerace Posted September 3, 2007 Author Report Share Posted September 3, 2007 custom programmed mine ran great for about a month then startedgetting kick back when i tried starting it causing me to break every thing from a kick idle gear to the clutch basket drive gear even a clutch cover because the pieces got jamed broke everything a least twice put stock bax on it runs fine no problems Quote Link to comment Share on other sites More sharing options...
wesw Posted September 3, 2007 Report Share Posted September 3, 2007 your plate didnt get advanced by any chance did it. cause if you add 4 degs on the plate the dyna will still add whats on it. hmm sorry about your problems bet that got expensive. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 3, 2007 Report Share Posted September 3, 2007 Yeah...especially since it's a BIG motor... I STILL haven't had time to get mine programmed. I'm gonna have a guy over on PS program mine, Shane...he knows his shit. I went back to stock CDI and 9 on my plate, just to see what happens. I've never heard of one losing their programming...I'd check the plate, as wes said. Quote Link to comment Share on other sites More sharing options...
FireHead Posted September 3, 2007 Report Share Posted September 3, 2007 Yeah...especially since it's a BIG motor... I STILL haven't had time to get mine programmed. I'm gonna have a guy over on PS program mine, Shane...he knows his shit. I went back to stock CDI and 9 on my plate, just to see what happens. I can program it as well if you need it done. I am not having the engine the Dyna unit is for in front of me might be a bit of a invitation for error though. :geek: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 3, 2007 Report Share Posted September 3, 2007 I can program it too...but...I'd rather give it to someone who's been programming them for drag race/alky banshee specifically for the last 5 or 6 years.... Quote Link to comment Share on other sites More sharing options...
dynodon Posted September 3, 2007 Report Share Posted September 3, 2007 I can program it too...but...I'd rather give it to someone who's been programming them for drag race/alky banshee specifically for the last 5 or 6 years.... Hey, Sorry I missed ya up in MI @ Bobs. I was bummed that the races were cancelled as well that day !! Did you get the mounts I left for you to check out ?? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 3, 2007 Report Share Posted September 3, 2007 Hey, Sorry I missed ya up in MI @ Bobs. I was bummed that the races were cancelled as well that day !!Did you get the mounts I left for you to check out ?? Who/What/Where? Nope...what mounts? Who did you leave 'em with? Track is supposed to be rented this Saturday....11 to 3...T&T session. Don, there's also a race @ albright shores end of this month....(sorry, got mixed up, Kentucky was November...) I posted it up, check it out.... http://www.bansheehq.com/forums/index.php?showtopic=83005 Quote Link to comment Share on other sites More sharing options...
dynodon Posted September 3, 2007 Report Share Posted September 3, 2007 HUH????? I was at Bobs last week, left a set of billet motor mounts with Dan. He said he would pass them on to you to look at to see if you wanted them. He talked to you on the phone while I was there, said "Dynodon" is here, BUT the races were cancelled due to water standing on the track. I would love to come out, BUT, I am back in Florida now, and my bike sold while I was up that way Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 3, 2007 Report Share Posted September 3, 2007 HUH????? I was at Bobs last week, left a set of billet motor mounts with Dan. He said he would pass them on to you to look at to see if you wanted them. He talked to you on the phone while I was there, said "Dynodon" is here, BUT the races were cancelled due to water standing on the track. I would love to come out, BUT, I am back in Florida now, and my bike sold while I was up that way Hmm...I must've missed him saying that... I haven't seen Dan since the weekend before the race got canceled...he picked up A Arms from my buddy. If he shows up to the race with shiny motor mounts...I'll have to call him out on it. LOL If I would've known all those people were gonna be there to hang out, I would've made it. When Roger called me, I was literally 15 minutes away....damn...sorry I missed you. Congrats on selling the bike, BTW...gonna build another...or just stay away for a while? Quote Link to comment Share on other sites More sharing options...
dynodon Posted September 3, 2007 Report Share Posted September 3, 2007 Ohhhhhh, NEVER know, I just might put something together !!! LOL I really havent decided just yet. Might do something over what is considered " the winter" time ... Anyway, yeah , he has a set of billet motor mounts, to rid of the "twisting" part save the ponies for the rear tires !!LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.