Jump to content

421 Cub, 300ft, +9 timing, 39mm pwks, Shearer OOF


J-Madd

Recommended Posts

Im not worried Dave as JT is MUCH heavier (bike and rider) and i liked to see him try different pipes. He is running very close to the same times even with all this against him. Apples to apples lets try it again and see the outcome. Shaynes bike runs good no doubt.

 

Sorry to Hi-jack this thread.. I'm not eactly a lightweight either. I'm over 210. Yeah there is a bunch of stuff on my bike thats not needed. I think if you were to wiegh our bikes they would be very close. I've been runnng the motor VERY conservative because I mostly dune drag. I should beable to break it into the 4.1's with some tuning. I was @ 4.221 last time at Bobs and my 60ft time was horrid. So I'm crossin my fingers. I've hit 4.14 in albright but I dont know if it was legit, the next time at the track we were running down a mud strip so I didn't really get a good chance to try and back it up. We'll see how it runs this weekend. I leaned it back some and bumped the timing up from 7-8 to about 11-12 and made some gear changes. I was crossing the line in 4th.

Link to comment
Share on other sites

Unfortuneately, Shane...I talked to Roger.

They've been getting hit with quite a bit of rain lately...and looks like it's raining there all day today...as well as tomorrow morning.

 

We might have another mud bog, I don't expect any impressive times out of any of us tomorrow...

 

On a side note, someone bring a straw or two in case Dan steps in a mud puddle...

Link to comment
Share on other sites

Unfortuneately, Shane...I talked to Roger.

They've been getting hit with quite a bit of rain lately...and looks like it's raining there all day today...as well as tomorrow morning.

 

We might have another mud bog, I don't expect any impressive times out of any of us tomorrow...

 

On a side note, someone bring a straw or two in case Dan steps in a mud puddle...

 

yeah.. its been that way here too.. I was hoping it was just us northern folk..

 

LOL atleast it wasn't me this time! :yelrotflmao: I was gonna add somthing but.. I got my shots in yesterday. I can't give him shit 2 days ina row.

Link to comment
Share on other sites

Well with all that rain if Dan runs, at least the starting line (Burn out box, for Dan) will be wet for his John Force style burnouts. jk lol :yelrotflmao:

Jmadd, please call if you need any help on setup for alky...

Link to comment
Share on other sites

Well with all that rain if Dan runs, at least the starting line (Burn out box, for Dan) will be wet for his John Force style burnouts. jk lol :yelrotflmao:

 

 

Damn I needed that one for today....I almost forgot that. I don't know what is more memorable...Mr. Force or the look on JT and my face when we realized what just happened and looked at each other....classic!!!

Link to comment
Share on other sites

That was your moral boost for the day as now were even on funnies for the week. :thumbsup:

Link to comment
Share on other sites

Hopefully Dan doesn't read this but.. I was going to get a pink fanny pack and put like a mock up parachute in it it. Then write on the outside "John Force ATV brake Kit" or somthing along those lines. and give it to him at the race tomorrow.

Edited by Fouledout421
Link to comment
Share on other sites

No problem about getting off track :cool: I started this thread several days ago with no replies and I look today and there's 23!!

 

I'm gonna run 0.124 dump tubes and mains, 60 pilots, powejets all the way out, needles in the middle (EGN) to start. I'll let ya'll know. I won't have an override for another week so I won't be able to get all of the power to the ground yet.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...