dwrracing Posted August 17, 2007 Report Share Posted August 17, 2007 hey buddy how much for that grille??? i cant take that out and put it in another color one right? ill take it probably if i can take it out Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 17, 2007 Author Report Share Posted August 17, 2007 (edited) hey buddy how much for that grille??? i cant take that out and put it in another color one right?ill take it probably if i can take it out I can remove the grill and ship it, $25. It's a good design, I like it, but it dosen't fit my fullbores. it is in pretty good shape. To install it just unscrew your stock plastic grill and screw this one in it's place. Easy as pie. I can ship this one over the weekend probably, as it would ship out of San Diego. Well at least I'm getting rid of the small stuff, but It would be nice to find someone in need of a crank or porting. The cylinders are a great buy, just hone them out. Or just run them if you want to, not like I really needed to rebuild this thing yet. But if not, I'm sure they will sell quick on ebay, maybe even get a little more for them. Leaving for Vegas Tomarrow so I will not be answering any replies after tonight until monday. Everyone stuff has shipped. Axle is still for sale too. Edited August 17, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
dwrracing Posted August 17, 2007 Report Share Posted August 17, 2007 i got 20 in my paypal right now i can paypal u now for them otherwise ill wait till i get paid for my adj timing plate Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 20, 2007 Author Report Share Posted August 20, 2007 Ok back from vegas and well I didn't win. Need to get this stuff sold soon or it will go on ebay next week. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 22, 2007 Author Report Share Posted August 22, 2007 intake sold / shipped Quote Link to comment Share on other sites More sharing options...
1sreamin350 Posted August 25, 2007 Report Share Posted August 25, 2007 I'll take the flywheel, stator and rear plastics if you meet me half way or so from claremont ca. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 28, 2007 Author Report Share Posted August 28, 2007 Rear plastics - pending Stator - Pending Axle - Pending Flywheel - Pending. Grill - Pending? Someone buy my crank and cylinders so I don't have to pay ebay $60 to list them. Since when did selling on ebay get so expensive! Quote Link to comment Share on other sites More sharing options...
spropson Posted August 31, 2007 Report Share Posted August 31, 2007 Do you still have the crank? Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 31, 2007 Author Report Share Posted August 31, 2007 Do you still have the crank? Yes I still have it. Quote Link to comment Share on other sites More sharing options...
spropson Posted August 31, 2007 Report Share Posted August 31, 2007 Is it in good working order? Yes I still have it. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted September 1, 2007 Author Report Share Posted September 1, 2007 (edited) Is it in good working order? Yea I pulled it out of my motor, which ran fine, just decided to go with a cub for this year. It was trued and welded before it went in not after I pulled it, but none of the wleds cracked or anything. I'm bringing it over to my friend's tomarrow who is Banshee Guru and has all the calipers n stuff to check it out. I need to pull the drive gear off it with an impact I will ask him to look it over to be sure, but nothing I could see wrong with it, and I would still be running it if I didn't decide to go with a 4 mil. Some people like to replace the bearing on one side to be safe since it is used, but I don't see any problems with it or anything like that. Those pics were taken fresh from the pull thats why there is oil, and some yamabond particles on it. Edited September 1, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted September 4, 2007 Author Report Share Posted September 4, 2007 (edited) Yea I pulled it out of my motor, which ran fine, just decided to go with a cub for this year. It was trued and welded before it went in not after I pulled it, but none of the wleds cracked or anything. I'm bringing it over to my friend's tomarrow who is Banshee Guru and has all the calipers n stuff to check it out. I need to pull the drive gear off it with an impact I will ask him to look it over to be sure, but nothing I could see wrong with it, and I would still be running it if I didn't decide to go with a 4 mil. Some people like to replace the bearing on one side to be safe since it is used, but I don't see any problems with it or anything like that. Those pics were taken fresh from the pull thats why there is oil, and some yamabond particles on it. Stator Sold, Flywheel Sold Rear Plastics Sold Axle Sold Cylinders Pending Crank - Bearings look fine, no up down play. Checked the rod clearance and Stator Side has .019, Gear Side .017 Both are still within factory specks. Front Plastics - For Sale Gas Tank Shroud - For Sale Grill - For Sale Cover - Who wants a cover plus switches? Shifter - For Sale Bumper - For Sale Light Covers - For Sale Stock Rear Wheel Hub - For Sale Edited September 4, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted September 5, 2007 Author Report Share Posted September 5, 2007 Front Plastics - For Sale Gas Tank Shroud - For Sale Grill - For Sale Cover - Who wants a cover plus switches? Shifter - For Sale Bumper - For Sale Light Covers - For Sale Stock Rear Wheel Hub - For Sale Crank = For Sale Cylinders = For Sale Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted September 6, 2007 Author Report Share Posted September 6, 2007 Front Plastics - For SaleGas Tank Shroud - For Sale Grill - For Sale Cover - Who wants a cover plus switches? Shifter - For Sale Bumper - For Sale Light Covers - For Sale Stock Rear Wheel Hub - For Sale Crank = For Sale Cylinders = For Sale Crank and Cylinders now on Ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=290158042421 http://cgi.ebay.com/ebaymotors/Yamaha-Bans...1QQcmdZViewItem Quote Link to comment Share on other sites More sharing options...
geeunit310 Posted September 8, 2007 Report Share Posted September 8, 2007 Crank and Cylinders now on Ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=290158042421 http://cgi.ebay.com/ebaymotors/Yamaha-Bans...1QQcmdZViewItem Can u post some pics of the gas tank shroud? How much? and shipping to 90745 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.