Justintoxicated Posted August 15, 2007 Report Share Posted August 15, 2007 (edited) Ok so I'm finaly going to drop a couple grand on a 4 mil cub. Might as well try an ease the pain a little. I will be posting more pics and prices as I figure them out. Here are some things for sale: Ported Cylinders $450 (Do not come with V-force reeds) Trued and Welded Crank $200 (Does not include Nuts or Gears or seals) Cylinders (Almost polished before painting) they are 2 over stock due to portwork. I would recommend them to be bored to the next size, or at least honed out as any engine builder would say. Although I was just going to replace the rings... I can still see some Crosshatching from when I put the jugs back on. They have about 2 seasons of use on them I believe. They are in excelent shape and it was a PITA to get them to look so good. They can be re-coated with some fresh Metalcast, or stripped and polished. (There is a small ding on in one of the sleves, but it has been there for some time, and is not in a critical location. It was there since I put it together) I believe you can see it in the pictures.. Porting is by Passion RE, this is the 12-port. Hell the porting was as expensive as I'm letting these go for. I also have 19cc domes available. Was trued and welded before I put in the Passion RE Motor. Welds are in great shape, it was running fine when I pulled it apart. If you have any questions on bearings etc let me know. Edited August 15, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 15, 2007 Author Report Share Posted August 15, 2007 Plastics: I Crashed but the plastics are still in pretty good shape, other than the nose which is a couple bends and a small crank from where the bumper pushed back into it (Not the bumper for sale). You could easily just cut out this damage on the nose and you would be good to go. HQ Stickers included These would ship out of San Diego @ actual shipping cost if possible. I have to have my Dad mail these for me. The Black Tank Shround is also for sale. I also have the Red Radiator Trim but it has switches drilled into the top of it. Also Have a stainless flame grill I would sell. I will try to get pics of these two pieces. Make Offers! Make Offers, Not dented, but could use some touch up paint. I find Duplicolor Metalcast Base coat is pretty close. Wheel Hub - (Only One) (other is slightly bent, can include if desire But I don't reuse bent hubs. $35 + Shipp OBO Stock Intake - Make Offers. Stock Shifter (2 bands are broken off it) -Offers. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 15, 2007 Author Report Share Posted August 15, 2007 (edited) Stock Impeller - Make Offers Stock Flywheel - $60 Stock Start (might sell if the price is right) Stock headlights from my 2000. Both work, but one has warped plastic. One of the covers is a little toasy on the inside (discolored) but works fine and is not noticable from the outside( That you look at) yea yea, someone left the lights on ALSO FOR SALE: (Will try to get pics) Stock Axle (Straight) Good Shape! (Also have carrier and skid) Stock A-Arms (Friend is borrowing them, so not sure on selling ATM) Stock Front Shocks. Stock Swingarm. Prices seem reasonable to me, since well, you get what you pay for. Some stuff is more and some is a little cheaper on ebay, but condition is key. Items that do not sell will end up on ebay. Please feel free to combine things and make offers. For example Crank and Cylinders, Etc. Please no Lowball offers. Parts are off my Dune Banshee, this bike is well maintained and so are the parts. Will Take PP or Money order only. Edited August 15, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Banchey Posted August 15, 2007 Report Share Posted August 15, 2007 PM sent Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 15, 2007 Author Report Share Posted August 15, 2007 (edited) Here is a picture of the small ding in the cylinder wall, when I pulled the head to find the dome was loose. (This is is when I first put everything together a couple years ago, it runs fine.) Painted Edited August 15, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
samc Posted August 15, 2007 Report Share Posted August 15, 2007 how much for the stock bumper? hopfully cheap im low on cash and trying to rebuild my topend, and would you part a right headlight from the 2? Quote Link to comment Share on other sites More sharing options...
chevrolet banshee Posted August 15, 2007 Report Share Posted August 15, 2007 how much for both head lights?? Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 15, 2007 Author Report Share Posted August 15, 2007 (edited) how much for the stock bumper? hopfully cheap im low on cash and trying to rebuild my topend, and would you part a right headlight from the 2? Bumper is 25 shipped, headlights are pending sale, Shocks Sold. Edited August 15, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 16, 2007 Author Report Share Posted August 16, 2007 (edited) More Stuff For Sale Stainless Grill $30 shipped OBO. Radiator Cover has holes for switches, Weatherproof connectos and wires will be removed. Switches all work I belive but I will remove unless someone needs them, since they cost more than the plastic piece lol. Make offers. Headlights: Sold Shocks: Sold - Shipped Axle: Pending (pics coming tonight) I also have a Subbox / Subwoofer for a Nissan Titan King Cab and would recommend local pickup. I have 2 boxes and only need one. This thing is practicaly brand new, I used this sub for like a week on the way to work, if that. Port fires towards rear door which is the best location for the port on most full size trucks. it is Semi-PreFab, in that they are mass produced but the sub and enclosure were designed to work together. Box is MDF with Some kind of spray on liner. Sub is 2 ohm 500-600 RMS 10". I can dem the box for local pickups. I knwo all the routing is a bit much for my taste (I liek plain design) but it goes under the seat so most of the box is hidden. More info Go Here: http://www.proboxloaded.com/homepage.shtml This box is takign up space, I think retail is about $400 for sub and box, just looking to get $100 back on this. I need the space and have a bunch of other subwoofers as well. I could ship but it is rather large and heavy. I belive this box will also fit some year Chevy 1500's. Edited August 16, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
zach45 Posted August 16, 2007 Report Share Posted August 16, 2007 how much for the red noss head and the front fenders? and what did you use to paint the jugs? Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 16, 2007 Author Report Share Posted August 16, 2007 how much for the red noss head and the front fenders? and what did you use to paint the jugs? - Not for sale going to use it on the Cub. But the domes are for sale 19cc. - $60 + shipping They are in good shape other than the front lip which isn't all that bad. - Duplicolor Metalcast, I learned that the paint will get lighter I guess from the heat. I would recommend about 10-12 light coats. Quote Link to comment Share on other sites More sharing options...
HKIC Posted August 16, 2007 Report Share Posted August 16, 2007 how much for both front and rear fenders? Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 16, 2007 Author Report Share Posted August 16, 2007 130 + shipping for both. Open to shipping suggestions they look like they will be a PITA to ship. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted August 16, 2007 Author Report Share Posted August 16, 2007 (edited) Axle I'll take 100 + shipping OBO It has never been re-straightened and is not bent. Swapped it for a GeForce to match my front end. Splines are perfect I can get a closer picture if needed. I never cleaned it up, this is how it was pulled off the bike. Lights- Sold / Shipped (Covers Still Available) Shocks - Sold / Shipped Edited August 16, 2007 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted August 17, 2007 Report Share Posted August 17, 2007 PM sent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.