Fireroad Express Posted August 13, 2007 Report Share Posted August 13, 2007 in between diaper changes with my new daughter, i managed to get out and do a few heat cycles on the new motor. after that i took it out for a rip. lots of horse power! i noticed when i let off in 6th and then hit it again the revs would come up but the bike would not gain speed porportionally with the motor.sounds to me like the clutch is slipping a bit. are the clutch spings in an fzr 1000 interchangealbe with a banshee? there is already a barnett kit in it but it doesn't seem to be doing the job. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 13, 2007 Report Share Posted August 13, 2007 In my opinion the best spring for the price is the Toomey springs. I use 6 Toomey's with my FZR fibers. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted August 13, 2007 Report Share Posted August 13, 2007 try 50/50 barnetts... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.