FireHead Posted July 23, 2007 Report Share Posted July 23, 2007 Gonna have to check tomorrow. I just got back from Oregon and I am not gonna have the plastic off until in the afternoon tomorrow. That's cool, whenver you get a chance. I found another project or two to keep me busy this weekend. :thumbsup: Quote Link to comment Share on other sites More sharing options...
projectbanshee33 Posted July 24, 2007 Report Share Posted July 24, 2007 Where did you buy it from? I assume that it does in fact fit and function properly on the OEM Banshee radiator? It sounds like we need someone to try it with a set of Fullbores. Is it much heavier that the stock cap? Does the quality seem to be ok? :geek: Stock cap weighs in at a meager 1.5 ouces and the thermocap tipped the scales at 2.4 ounces. Difference is less than a shot of tequila. Here are a couple of pics of the thermocap with Fullbores. One pic was taken while seated, the other while leaning slightly forward. Only complaints are that the gauge is not liquid filled and the face is rotated 90 degress off with the cap completely seated. Would be nice to clock the gauge somehow, but I haven't figured out how to do it without destroying the gauge. I will probably just leave it as is, put it on with the bottom of the gauge facing the right. Just a quick glance and if the needle is pointing anwhere to the right of straight up, I know I am in the dreaded zone of plenty. Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted July 24, 2007 Report Share Posted July 24, 2007 That's awesome! Where did you find that at? :thumbsup: I found 4 on ebay. the price blows but this happens. http://cgi.ebay.com/ebaymotors/THERMOCAP-1...sspagenameZWD1V Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted July 24, 2007 Author Report Share Posted July 24, 2007 Firehead, total height on the cap with the sensing bulb or just the outside area? Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 24, 2007 Report Share Posted July 24, 2007 Stock cap weighs in at a meager 1.5 ouces and the thermocap tipped the scales at 2.4 ounces. Difference is less than a shot of tequila. Here are a couple of pics of the thermocap with Fullbores. One pic was taken while seated, the other while leaning slightly forward. Only complaints are that the gauge is not liquid filled and the face is rotated 90 degress off with the cap completely seated. Would be nice to clock the gauge somehow, but I haven't figured out how to do it without destroying the gauge. I will probably just leave it as is, put it on with the bottom of the gauge facing the right. Just a quick glance and if the needle is pointing anwhere to the right of straight up, I know I am in the dreaded zone of plenty. ...............that answered my question. I was afraid that the cap was going to foul the rear edge of the hole in the Fullbores. :geek: Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 24, 2007 Report Share Posted July 24, 2007 Firehead, total height on the cap with the sensing bulb or just the outside area? I was simply trying to figure out how much higher the cap was going to be than an OEM cap, but it looks like someone else answered my question. Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted July 27, 2007 Report Share Posted July 27, 2007 this is with the plastic uncut. if anyone is interested i`ll post pics after i cut the grill. <br> <br> Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted July 28, 2007 Report Share Posted July 28, 2007 I got mine too but I don't have my banshee. I'm not all that impressed with it. Oh well... Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted July 28, 2007 Report Share Posted July 28, 2007 Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted July 28, 2007 Author Report Share Posted July 28, 2007 Wow, nice hole. :biggrin: Quote Link to comment Share on other sites More sharing options...
FireHead Posted July 31, 2007 Report Share Posted July 31, 2007 Does anyone have pictures of this cap with a set of Fullbores yet? :geek: Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted July 31, 2007 Author Report Share Posted July 31, 2007 Isn't there a bunch of pics about 3 posts up? Quote Link to comment Share on other sites More sharing options...
FireHead Posted December 2, 2007 Report Share Posted December 2, 2007 Isn't there a bunch of pics about 3 posts up? Yeah, I might be retarded. I am looking into it. Quote Link to comment Share on other sites More sharing options...
Dgrey Posted December 3, 2007 Report Share Posted December 3, 2007 Wow, nice hole. :biggrin: lol Quote Link to comment Share on other sites More sharing options...
HotCarl Posted December 4, 2007 Report Share Posted December 4, 2007 Yeah, I might be retarded. I am looking into it. It took you 5 months to figure it out? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.