jbooker82 Posted July 9, 2007 Report Share Posted July 9, 2007 #1. Pro Design Pro Flow with K&N Filter, and K&N PreCharger. Bracket has an oring seal that seals the plate to the air box so no dirt can get inbetween the plate and air box. It allows you to run with no air box lid because the filter clamps to the billit aluminum plate. $45 Shipped. #2. Adjustable timing stator plate. allows you to adjust from -10deg to +10 deg. Plate is used but looks bran new other than where the bolts tighten down against the plate. $25 shipped #3. Noss Machine Reed spacers. They are the aluminum spacers. The go inbetween the cylinders and the reeds. I dont need them any more because I now run a different intake. $20 shipped. You can PM me or Email me at jbooker82@yahoo.com I accept paypal or US postal money orders. Thanks for looking. Here are the pics. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 9, 2007 Report Share Posted July 9, 2007 Josh...did I sell you those reed spacers? I can't remember. Free bump for a good guy and good seller.... These are great prices!!! Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 9, 2007 Author Report Share Posted July 9, 2007 Josh...did I sell you those reed spacers? I can't remember. Free bump for a good guy and good seller.... These are great prices!!! Thanks much appreciated. :thumbsup: I cant remember it was ethire you or DOTD. I remember buying the Short Heat Shield sleeves that cascade sells from you. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 9, 2007 Report Share Posted July 9, 2007 Reason I ask is because the corners on the inside are machined down, and you can run these spacers before or after the cage. They have to be ground a little if you're gonna put the spacers in front of the cages on VForce style...which I did for my motor.... But ya don't need spacers for a cub!!! Good luck. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 10, 2007 Author Report Share Posted July 10, 2007 Ok I see what your taling about now. I just ran them for a little while. When I had my old PJ carbs and UPP racing intakes (looked like stock only for bigger carbs). Helped move the carbs so they didnt hit the clutch lever. Quote Link to comment Share on other sites More sharing options...
shee rips Posted July 10, 2007 Report Share Posted July 10, 2007 im interested in the timing plate ill shoot you a pm later Quote Link to comment Share on other sites More sharing options...
WALLACE84 Posted July 10, 2007 Report Share Posted July 10, 2007 I will take the spacers. Do you have paypal? Quote Link to comment Share on other sites More sharing options...
WALLACE84 Posted July 10, 2007 Report Share Posted July 10, 2007 Im an idiot. I read the rest of your post and realized you accept paypal. Pm me with your addy and I will send the money right away. Thanks Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 10, 2007 Author Report Share Posted July 10, 2007 Spacers are sold to WALLACE84 Quote Link to comment Share on other sites More sharing options...
chappy Posted July 10, 2007 Report Share Posted July 10, 2007 Hey bud,I sent you an email Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 10, 2007 Author Report Share Posted July 10, 2007 Timing Plate Sold to chappy I guess all I have left is the Pro Design air filter kit. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 12, 2007 Author Report Share Posted July 12, 2007 Still Have the Pro Desing plate and filter setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.