HammerShee99 Posted July 2, 2007 Report Share Posted July 2, 2007 Going back to the twin carb setup and I'm gonna sell the single carb to pay for my new clutch and cylinder porting... I have a Keihin 35mm with a Trinity 2-into-1 intake, stock reed cages w/ Boyesens, and a K&N filter with outerwear. The carb has a couple screws stripped out on the bottom cap and it's been drilled out so that the cap will come off, you should be able to drill all the way through and put new screws in without much of an issue though. I'd like $400 for the entire setup, leave a note here or PM me if you're interested. I'll stop by the shop and take a couple pics of the setup also if you'd like. Quote Link to comment Share on other sites More sharing options...
Washburn Posted July 2, 2007 Report Share Posted July 2, 2007 Ill give you 280 shipped to 15201 for the Intake system boot and carb only. Quote Link to comment Share on other sites More sharing options...
HammerShee99 Posted July 4, 2007 Author Report Share Posted July 4, 2007 Carb/intake is sold pending payment. My VForces won't hook up to the stock intake boots, so unless anybody has a suggestion for how I can get them to hook up with the stock intake boots, they're gonna be sold in lieu of my Boyesens. I know for sure that they'll hook up to a Trinity 2-into-1 because that's what they're off of. I'm asking $80 shipped for the reeds. Also got a K&N with outerwear for sale, make an offer for it. Might have some parts off an '86 YZ250 for sale soon, thinking about parting it out. Let me know if there's anything in specific you guys are looking for. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted July 4, 2007 Report Share Posted July 4, 2007 What do you mean they wont hookup. You have to cut the rubber things off of the back side of the intake boot so it will work. That is all you have to do. Quote Link to comment Share on other sites More sharing options...
HammerShee99 Posted July 4, 2007 Author Report Share Posted July 4, 2007 What do you mean they wont hookup. You have to cut the rubber things off of the back side of the intake boot so it will work. That is all you have to do. Hmmmm, will have to look into that, thanks. That said, I'll hold off on selling the VForces for now, but the K&N is still for sale if anybody's interested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.