Jump to content

98 Yamaha Blaster, won't start


Recommended Posts

i know this isn't a banshee but i tried Blasterhq.com but it was sayin it was forbidden.

 

my blaster started fine and ran good all day. my dad took off the air filter cause it was completely gone. well i rode it all day ,even went a little muddin, with the air filter off. at the end of the day the damn thing wouldnt start. i took of the carberator and took it apart and cleaned the whole thing with carb cleaner and even cleaned the jet. i took off the air intake and cleaned all that. i go to kick start it and it won't do anything. if anyone has any idea what it might be please let me know.

 

thanks,

 

jd

Link to comment
Share on other sites

Riding an ATV without a filter, is a good way, to ruin a motor. You will be really lucky, if your top end isn't destroyed. I hate to say this, but what you did, was plain stupid. If everything is clean, carb wise, and it still won't start, do a compression check. If it's 100 lbs. or below, then rebuild the top end. Low compression will make them very hard, if not impossible to start. :blink:

Link to comment
Share on other sites

thanks a lot. my dad didnt tell me the air filter was out of it.

 

how do you go bout checking the compression?

 

Well, that's one reason to check your Blaster over, before riding it, and after riding it. Make sure everything is where it's supposed to be, and working.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...