okbeast Posted June 25, 2007 Report Share Posted June 25, 2007 Wanting to PC the springs but have no clue on how to tear them apart. Anyone got some info? Quote Link to comment Share on other sites More sharing options...
BenBB Posted June 25, 2007 Report Share Posted June 25, 2007 I'm not sure if you can get the fronts apart...I'm sure ya can one way or another heh, I haven't looked that close to see if it's a pin or what. The rear you should be able to remove the lower spring retainer; use a spring compressor and slide the lower spring stop deal off (or back off the preload all the way and use some tiedown straps or something to compress the spring enough to remove the retainer). Quote Link to comment Share on other sites More sharing options...
racer Posted June 26, 2007 Report Share Posted June 26, 2007 I dont even use a compressor, just back the preload out as far as possible and go from there. thats for my rear and 450 fronts. Quote Link to comment Share on other sites More sharing options...
91banshee Posted June 26, 2007 Report Share Posted June 26, 2007 Wanting to PC the springs but have no clue on how to tear them apart. Anyone got some info? yes you can take the fronts apart , there is a lock nut just under the top of the spring you will need a thin wrench and you can take them apart Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.