jlsolstice Posted June 25, 2007 Report Share Posted June 25, 2007 I was wondering if anyone had any suggestions as to where I should send my jugs to get ported? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 25, 2007 Report Share Posted June 25, 2007 I was wondering if anyone had any suggestions as to where I should send my jugs to get ported? Do a search and you will find more than you can handle on this subject. Quote Link to comment Share on other sites More sharing options...
swrbansheeboy Posted June 25, 2007 Report Share Posted June 25, 2007 where are you located? you may have someone right in your own backyard...i take all my stuff to twister... http://webforce.nwrain.net/founder/twistercrankshaft/ Quote Link to comment Share on other sites More sharing options...
jlsolstice Posted June 25, 2007 Author Report Share Posted June 25, 2007 where are you located? you may have someone right in your own backyard...i take all my stuff to twister...http://webforce.nwrain.net/founder/twistercrankshaft/ Michigan, I know there are some places here in MI. but I havent really heard a whole lot about them. Quote Link to comment Share on other sites More sharing options...
Jhughes7 Posted June 25, 2007 Report Share Posted June 25, 2007 I think michigan is a good place to be, I hear there is alot of reputable builders there but I cant think of any off the top of my head I am sure someone else will chime in. Quote Link to comment Share on other sites More sharing options...
CadillacBanshee Posted June 25, 2007 Report Share Posted June 25, 2007 GASSRX.COM did mine and it was a clean job. It was cheap too. Quote Link to comment Share on other sites More sharing options...
bansh03 Posted June 25, 2007 Report Share Posted June 25, 2007 RB Racing is near Lansing link to website---->click here Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted June 27, 2007 Report Share Posted June 27, 2007 Member Rocketboy [Flotek Performance]. Never heard any complaints on his work. Just good stuff! http://flotek.everything2stroke.com/porting.html Quote Link to comment Share on other sites More sharing options...
dajogejr Posted June 27, 2007 Report Share Posted June 27, 2007 Michigan, I know there are some places here in MI. but I havent really heard a whole lot about them. Two guys in MI that I would let work on my cylinder. Dan Hull @ A&S Racing builds some of the fastest bikes in the country. However, he's busy...isn't too great about returning email, phone calls, etc. However, you show up at his shop in person with cash in hand, he's a pretty good guy. BansheeDan lives near there, and got a real good port job for a good price from Dan. The other is Bob @ R&B Racing. Helluva nice guy, I've seen some of his porting...and his price is excellent. Normally, I'd say you get what you pay for. In his case...I'd say you get a helluva lot more!!! 517-388-3662 is Bob @ R&B Racing. Grand River Racing (Andy) no longer does work for people, he only does a little work for a select chosen few. RDZ racing (Rob) builds very, very fast bikes. However, his customer service sucks in my opinion, unless you're spending thousands and thousands with him. Based on that...I wouldn't let him port my chain saw or weed eater. Rob builds fast shit, his customer service is terrible for the average joe....and this is from my own personal experience, or lack thereof. He missed out on selling me a 4 mil cub complete, crank, pistons, cylinders, clutch...chain...etc. And he's since missed out on selling me pipes and a chain tensioner. If he's too busy to pickup the phone and return a phone call before the sale, how good do you think he's gonna take care of you after the sale. (For that matter...he's never returned any of my 3 phone calls or 2 PMs to him) Quote Link to comment Share on other sites More sharing options...
jlsolstice Posted June 28, 2007 Author Report Share Posted June 28, 2007 Hey thanks guys, I really appreciate the info. I will have to look into a few of these places and see what I can find. Thanks again, Josh Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted June 28, 2007 Report Share Posted June 28, 2007 +1 for Flotek. http://flotek.everything2stroke.com/porting.html The guy ported my juggs and lightened my flywheel in 2 weeks. I had them back in no time. He helped me a lot after i got my juggs and all back in order to get my set up right. Great service after the sale. I shipped my stuff to him across the country and i had no problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.