SAVAGE420 Posted May 30, 2007 Report Share Posted May 30, 2007 So i want to put some 1-1/8 bars on my banshee. So im going to have to get a new upper and lower bar clamp to fit right? Well i know how to get the top clamp off but how do i get the lower clamp thats attached to the stem off? Also where can i pick i nice 1-1/8 bar clamp i need up?....Can someone point me in the direction i need to go to get one and instal it? Quote Link to comment Share on other sites More sharing options...
06BaNsHeE Posted May 30, 2007 Report Share Posted May 30, 2007 Look on Ebay for a trail-tech polished 1 1/8 bar clamp.I just bought one and pro-taper 1 1/8 bars with grips for 139.99 on ebay.Very nice clamp Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 30, 2007 Author Report Share Posted May 30, 2007 Look on Ebay for a trail-tech polished 1 1/8 bar clamp.I just bought one and pro-taper 1 1/8 bars with grips for 139.99 on ebay.Very nice clamp Ok, but how did you get the old lower clamp attached to the steering stem off? Do you have a close up pic of your clamp/bar set up or a link to it on ebay? Quote Link to comment Share on other sites More sharing options...
06BaNsHeE Posted May 30, 2007 Report Share Posted May 30, 2007 http://cgi.ebay.com/ebaymotors/Yamaha-Bans...sspagenameZWD1V thats the link Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 30, 2007 Author Report Share Posted May 30, 2007 Ok thanx ...thats a great deal. But i still dont know how to get the lower bar clamp off to be able to put on the new clamps ? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 30, 2007 Author Report Share Posted May 30, 2007 Well...i looked in my Clymers manual and it doesn't show how to take the bottom clamp off the stem. But it doesn't look like it comes off unless i had some nasty press of something, so did you or does the new clamps just bolt onto the old lower clamp some how? Im kinda stumped on how it goes. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted May 30, 2007 Report Share Posted May 30, 2007 The clamp kit bolt to the lower mounts on the stock stem.. They dont come off you just bolt down ontop of them. My Tag T2 kit is the same as the trail tech. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 30, 2007 Author Report Share Posted May 30, 2007 The clamp kit bolt to the lower mounts on the stock stem.. They dont come off you just bolt down ontop of them. My Tag T2 kit is the same as the trail tech. Ok thanx for clearing that up for me. I thought thats how it would be. :biggrin: So it must raise it up a 1/2" or so i would take it. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted May 30, 2007 Report Share Posted May 30, 2007 Ok thanx for clearing that up for me. I thought thats how it would be. :biggrin: So it must raise it up a 1/2" or so i would take it. Yeah but the bars compensate for the rise so it is still about the same height as stock bars. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted May 30, 2007 Author Report Share Posted May 30, 2007 Yeah but the bars compensate for the rise so it is still about the same height as stock bars. How much rise did you go with? Low, med, high. Also my msr bars i have now are a lil higher than stock i think and im 6'1 so what do you think i should go with in a rise? Quote Link to comment Share on other sites More sharing options...
shanYE west Posted May 30, 2007 Report Share Posted May 30, 2007 How much rise did you go with? Low, med, high. Also my msr bars i have now are a lil higher than stock i think and im 6'1 so what do you think i should go with in a rise? I think mine are CR high.. If your a taller fellow.. you might like a CR double high. Quote Link to comment Share on other sites More sharing options...
Bansh88 Posted May 31, 2007 Report Share Posted May 31, 2007 Tag makes a "Banshee Bend". That is the tallest bar they make. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted June 4, 2007 Author Report Share Posted June 4, 2007 (edited) So i went ahead and put this on the old ladys credit card without her knowing :biggrin: But it was a deal i couldn't pass up on http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewIt...p;rd=1&rd=1 A nice high bar is what i needed, should be here in a week. Anyone run the pastrana FMX bend? :beer: Edited June 4, 2007 by savage420 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.