mybadbanshee Posted May 26, 2007 Report Share Posted May 26, 2007 just seein what clutch kits some of you run.and why. Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted May 26, 2007 Report Share Posted May 26, 2007 i think mines stock. i run it cuz it works fine. Even with my port job im getting, it will do fine. Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted May 26, 2007 Report Share Posted May 26, 2007 Most are gonna tell you get a FAST clutch. Best out there from what i hear. Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted May 26, 2007 Report Share Posted May 26, 2007 A Fast clutch, a Magnum basket, and a pancake bearing. Great clutch for higher HP, my stock basket was worn, and the pancake bearing will keep the rod, and ball from welding together. I'm also running an E-Z Pull Lever, and perch, because the Fast clutch, with all six heavy springs, is a tough pull. Quote Link to comment Share on other sites More sharing options...
Devans Posted May 26, 2007 Report Share Posted May 26, 2007 Like everyone else has said, f.a.s.t. clutch. But ive given hell to my tusk hd clutch and its holding up great, and only spent 40 bucks on it i bleieve. Depends on how much power you are making. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted May 26, 2007 Report Share Posted May 26, 2007 if your not running a lockup then look into sopme FZR 1000 Fibers and stock steels. if your running a lockup you can pretty much run anything. Quote Link to comment Share on other sites More sharing options...
mybadbanshee Posted May 26, 2007 Author Report Share Posted May 26, 2007 can u run a lockup with a stock cover? Quote Link to comment Share on other sites More sharing options...
RZBansheeMan Posted May 26, 2007 Report Share Posted May 26, 2007 The stock cover has to be modified. You can do it yourself or have it done, there usually is some "do it yourself lock up kits" on Ebay that include the new center for your stock clutch cover. I am not sure who they are made by though. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted May 26, 2007 Report Share Posted May 26, 2007 what ^^^he said^^^ also if your running a hinson pressure plate they have a new lockup so you dont have to mod the plate too... Quote Link to comment Share on other sites More sharing options...
mybadbanshee Posted May 27, 2007 Author Report Share Posted May 27, 2007 what ^^^he said^^^ also if your running a hinson pressure plate they have a new lockup so you dont have to mod the plate too... ive got a hinson basket but not plate.i think im going to go with the F.A.S.T. clutch. Quote Link to comment Share on other sites More sharing options...
rocketboy Posted May 27, 2007 Report Share Posted May 27, 2007 i have found the most important factor for the clutch is the springs .you want heavy duty springs a yz490 clutch is probably the best one yo ucould get for a banshee and still fit inside the basket it is bigger and beefier than even the FZR1000 setup that most guys tell yo uto run or sell you Quote Link to comment Share on other sites More sharing options...
mybadbanshee Posted May 27, 2007 Author Report Share Posted May 27, 2007 (edited) i have found the most important factor for the clutch is the springs .you want heavy duty springs a yz490 clutch is probably the best one yo ucould get for a banshee and still fit inside the basket it is bigger and beefier than even the FZR1000 setup that most guys tell yo uto run or sell you you talking about a clutch for a yz490 dirtbike?is this a direct fit?can i use the steels that i have cause they are not worn at all?do you need to use the rubber cushion rings with this setup? Edited May 27, 2007 by mybadbanshee Quote Link to comment Share on other sites More sharing options...
bansheeyfz Posted May 27, 2007 Report Share Posted May 27, 2007 I hear that people use R6 clutches in banshees? Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted May 27, 2007 Report Share Posted May 27, 2007 I wouldn't fuck with trying to put this with that and that with this.. Just pay the 80-90 bucks for the FAST clutch and be done with it.. If my memory serves me correct I have heard of people runnin that clutch on 4 and 10mill cubs with good results. :shrug: RIPPEN Quote Link to comment Share on other sites More sharing options...
mybadbanshee Posted May 27, 2007 Author Report Share Posted May 27, 2007 I wouldn't fuck with trying to put this with that and that with this.. Just pay the 80-90 bucks for the FAST clutch and be done with it.. If my memory serves me correct I have heard of people runnin that clutch on 4 and 10mill cubs with good results. :shrug: RIPPEN thats what i was thinking Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.