nwitthus Posted May 21, 2007 Report Share Posted May 21, 2007 Does anyone know of a good motor shop in the seattle area to get a port job Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted May 21, 2007 Report Share Posted May 21, 2007 Does anyone know of a good motor shop in the seattle area to get a port job Dyno Dave of ILR Performance (bonney Lake), Dan Wade of Patriot Racing (Bonney Lake), or Mike Troung (old mechanic for Enumclaw SKY). What kind of port job do you want, I can tell you which one of these guys to call. Quote Link to comment Share on other sites More sharing options...
nwitthus Posted May 22, 2007 Author Report Share Posted May 22, 2007 (edited) I was not sure thats why I would like to talk to someone I drag but also like to ride around thats why I think a dune/play port would be good do either of these shops have a website? Edited May 22, 2007 by nwitthus Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted May 22, 2007 Report Share Posted May 22, 2007 Patriot has a site, but both dan and dyno dave work for Boeing now and do port work on the side. I would recommend Dan at patriot Racing for a ripper dune bike though. Email him and he should get back to you within a few days. Patriot Racing Quote Link to comment Share on other sites More sharing options...
96dragbanshee Posted May 23, 2007 Report Share Posted May 23, 2007 send them to jeff at fast racing just send the cylinders and he will port them you can find him on here just look for www.farmandsandtoys.com ad and he will do what is best for you at a decent price he is in kansas but shipping on them would be rather cheap. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted May 23, 2007 Report Share Posted May 23, 2007 I would use patriot, dan knows his tuff and he is local so he can help you set up your compression and everything. Quote Link to comment Share on other sites More sharing options...
FadedDreams Posted May 23, 2007 Report Share Posted May 23, 2007 I have Dan's dune port and hes done many other things to my motor and i have no complaints what-so ever.I wish i could that close to a builder,but i'm sure it would involve me being broke all the time,lol. Quote Link to comment Share on other sites More sharing options...
Nitmare67 Posted May 23, 2007 Report Share Posted May 23, 2007 send them to jeff at fast racing just send the cylinders and he will port them you can find him on here just look for www.farmandsandtoys.com ad and he will do what is best for you at a decent price he is in kansas but shipping on them would be rather cheap. I agree with that 100% Shipping is dirt cheap and I have never seen better customer service anywhere and Ive talked to Dan, Eric Gorr back in the day and Jeff at FAST racing. Not to mention I just got my bike back from Jeff and I cant believe how much faster and better this damn thing runs. Talk about smooth shifting damn. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted May 23, 2007 Report Share Posted May 23, 2007 Well I know Dan personally, I am going riding with him this weekend in Oregon. He is smart, he has great customer service, and I have seen a lot of his work so I can honestly say he is good. Not to mention the fact that if you need domes cut, or pistons oil ringed or anything extra he can help set it all up and he is local, which means no shipping and you get to talk to him in person. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted May 25, 2007 Report Share Posted May 25, 2007 I just got my 400cc Drag ported engine going. It hauls the mail. The cylinders were ported by dan at patriot racing when i bought them. They needed resleeved so I sent them back to the man that ported them and had him put sleeves in that start out at 66mm and can be bored to 68mm on there final bore. He did an excelent job. Quote Link to comment Share on other sites More sharing options...
mpbanshee Posted May 26, 2007 Report Share Posted May 26, 2007 DaveMooreRacing.com Top notch work, and great service and price as well. I think he is outside of Salem. Quote Link to comment Share on other sites More sharing options...
Fireroad Express Posted May 26, 2007 Report Share Posted May 26, 2007 try "Twister Crankshafts". they do awesome portwork. intake pics- dune port job by twister. Quote Link to comment Share on other sites More sharing options...
swrbansheeboy Posted May 26, 2007 Report Share Posted May 26, 2007 louis at twister is always my #1 pick when it comes to porting or machinework period but he's located down here in little old boring oregon. up in your neck of the wood's i'd say dan at patriot. he's kinda hard to get ahold of now days but it's well worth the wait. i know several people with his work and it's all been top notch... Quote Link to comment Share on other sites More sharing options...
FireHead Posted May 26, 2007 Report Share Posted May 26, 2007 Dyno Dave of ILR Performance (bonney Lake), Dan Wade of Patriot Racing (Bonney Lake), or Mike Troung (old mechanic for Enumclaw SKY). What kind of port job do you want, I can tell you which one of these guys to call. Dan at Patriot would be my 1st choice if you didn't want to ship your parts. I have heard Dan has been off the radar lately. I am not sure if there is any trith to that. Quote Link to comment Share on other sites More sharing options...
FireHead Posted May 26, 2007 Report Share Posted May 26, 2007 try "Twister Crankshafts". they do awesome portwork. intake pics- dune port job by twister. Louis at Twister is awesome....................and now he is just ride down the road from me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.