christ6 Posted May 15, 2007 Report Share Posted May 15, 2007 is the plastic gear inside to the rigth side (under the clutch cover) the impeller itself or just a gear that turns the impeller? cause i been reading that the impellers are shit and break alot and the thing which i just described i have just found to broken under the clutch cover is this the peice you can get made from billet that is alot better? Quote Link to comment Share on other sites More sharing options...
woodwardspecialties Posted May 15, 2007 Report Share Posted May 15, 2007 pro design and a few other companies offer billet impellars. Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted May 15, 2007 Report Share Posted May 15, 2007 is the plastic gear inside to the rigth side (under the clutch cover) the impeller itself or just a gear that turns the impeller? cause i been reading that the impellers are shit and break alot and the thing which i just described i have just found to broken under the clutch cover is this the peice you can get made from billet that is alot better? The plastic gear, is what turns the impellar, and as far as I know, you have to use the plastic one from Yamaha. The impellar is also plastic, and if you're replacing the gear, you might as well get the billet impellar, so you have one less worry in the future. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted May 15, 2007 Report Share Posted May 15, 2007 The plastic gear is white, this is only replaceable as a factory yamaha part. The piece that is green is the impeeler, and can be replaced with a billet one. Quote Link to comment Share on other sites More sharing options...
RoostRocket Posted May 15, 2007 Report Share Posted May 15, 2007 the pro design ones are very high quality. if i were you i would stay away from the modquad ones i hear alot of bad things about them . Quote Link to comment Share on other sites More sharing options...
blowit Posted May 15, 2007 Report Share Posted May 15, 2007 the pro design ones are very high quality. if i were you i would stay away from the modquad ones i hear alot of bad things about them . One thing to remember is, because of that dumb idea of the plastic impeller drive gear, if the water pump bearings start going south, that gear will shear right off and you will totally lose cooling. Make sure the bearings are in good condition. Brandon Quote Link to comment Share on other sites More sharing options...
5150banshee Posted May 15, 2007 Report Share Posted May 15, 2007 if your gonna replace the water pump impeler and gear u should replace the bearing also. Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted May 15, 2007 Report Share Posted May 15, 2007 One thing to remember is, because of that dumb idea of the plastic impeller drive gear, if the water pump bearings start going south, that gear will shear right off and you will totally lose cooling. Make sure the bearings are in good condition. Brandon It would be wise to replace the seal also, if the bearing needs replaced. Just cover your bases. Quote Link to comment Share on other sites More sharing options...
RoostRocket Posted May 15, 2007 Report Share Posted May 15, 2007 while your in there you might as well do a complete rebuild...j/k :wink: Quote Link to comment Share on other sites More sharing options...
MILO Posted May 15, 2007 Report Share Posted May 15, 2007 i didn't replace the gear, but i did replace the impeller, seal and bearing altogether when i did mine. the seal and bearing are cheap and easy to install. do it right the first time bud. :thumbsup: oh yeah, and don't forget new gaskets for the side cover too. Quote Link to comment Share on other sites More sharing options...
christ6 Posted May 15, 2007 Author Report Share Posted May 15, 2007 once again thanks for all the help guys, i really just wasnt sure if i was going to have to order parts from yamaha as well as the impeller from else wheres, anyone know a place i can order a prodesign billet impeller in canada? Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted May 15, 2007 Report Share Posted May 15, 2007 once again thanks for all the help guys, i really just wasnt sure if i was going to have to order parts from yamaha as well as the impeller from else wheres, anyone know a place i can order a prodesign billet impeller in canada? We have all those parts on hand and have shipped to you before!! :thumbsup: Quote Link to comment Share on other sites More sharing options...
christ6 Posted May 16, 2007 Author Report Share Posted May 16, 2007 We have all those parts on hand and have shipped to you before!! :thumbsup: :biggrin: yep i sure have, and i will continue on doin so if i cant find anything in canada with good stuff, but importing that stuff into canada cost me nearly an extra 100$ and i also orders from noss at the same time which cost me about the same, real pain in the ass when its all said and done, customs ends up being the ones making all the money anyways im sure ill be in touch with you again sooner or later little off topic but anyone know of a site like this site (which is extremely helpful) where i can find info on kx 250's? Quote Link to comment Share on other sites More sharing options...
strokerace Posted May 16, 2007 Report Share Posted May 16, 2007 the pro design ones are very high quality. if i were you i would stay away from the modquad ones i hear alot of bad things about them . what have you heard about the mod quad ones because im building a motor right now and thats what i have to put on mine and if its something i need to be concerned about ill send it back an get a different one thanks Quote Link to comment Share on other sites More sharing options...
MODQUAD Posted May 16, 2007 Report Share Posted May 16, 2007 the pro design ones are very high quality. if i were you i would stay away from the modquad ones i hear alot of bad things about them . ROOST ROCKET I TAKE IT YOU ARE FRIENDS OR SOMETHING WITH THE BOYS AT PRO DESIGN THERE PRODUCTS ARE GOOD BUT FAR FROM THE BEST. JUST SO YOU MIGHT HAVE A CLUE WHAT YOU ARE TALKING ABOUT NEXT TIME WE HAVE NOT HAD A PROBLEM WITH OUR IMPELLERS AT ALL THAT MEANS ZERO DEFECTS WE HAVE SOLD I WOULD GUESS MAYBE 3 TIMES WHAT PRO WHATEVER HAS EVER SOLD. SO IF YOU EVER NEED ANY MORE INFO FEEL FREE TO LET US SET YOU STRAIGHT BEFORE YOU TALK. LATER MODQUAD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.