04sand4 Posted November 13, 2008 Report Share Posted November 13, 2008 (edited) Check out this killer deal---- 06 450 arms , shocks , and tie rods. All for the price of 350.00. Just need to get tie rod ends. In the right place at the rig :cool: ht time . :cool: Edited November 13, 2008 by 04sand4 Quote Link to comment Share on other sites More sharing options...
R/C Hippie Posted December 14, 2008 Report Share Posted December 14, 2008 Check out this killer deal---- 06 450 arms , shocks , and tie rods. All for the price of 350.00. Just need to get tie rod ends. In the right place at the rig :cool: ht time . :cool: DO you have any more left? :sad: Quote Link to comment Share on other sites More sharing options...
R/C Hippie Posted December 14, 2008 Report Share Posted December 14, 2008 Here's a few pics of my YFZ450 setup on my Banshee. The first pic is the setup with stock 450 shocks and the second pic is with a set of Fox Shocks. The Fox shocks are actually off of an Arctic Cat Snowmobile. They can be adjusted up to 150 psi. I have them set at about 45 psi. The ride for me is real nice, great on the whoops. what art cat did you get thows from and how long are they? Quote Link to comment Share on other sites More sharing options...
2 STROKIN' Posted January 4, 2009 Report Share Posted January 4, 2009 These pictures are also in my Suspension Forum posting, but here they are again to wet the appetite. 450 Arms installed, at the dunes... http://i46.photobucket.com/albums/f115/Ban...450_dunes_2.jpg Another at the dunes... http://i46.photobucket.com/albums/f115/Ban...450_dunes_3.jpg These are really what make this kit!! http://i46.photobucket.com/albums/f115/Ban...pacer_inst2.jpg http://i46.photobucket.com/albums/f115/Ban...pacer_inst1.jpg Thanks!! - Brian I know this is an old thread, but are your kits for the YFZ450 susp. still avail. ??? Please let me know...thanks, Mike. Quote Link to comment Share on other sites More sharing options...
SpecialEd 05 Posted January 19, 2009 Report Share Posted January 19, 2009 Ditto, and can you ship to Australia? Quote Link to comment Share on other sites More sharing options...
spinechiller Posted January 21, 2009 Report Share Posted January 21, 2009 Ditto, and can you ship to Australia? I would like a set also if possible Quote Link to comment Share on other sites More sharing options...
SonOfSand Posted March 4, 2009 Report Share Posted March 4, 2009 I already have a set of YFZ A arms and tie rods, what else do I need to make this work. How much are the spacers? Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted March 5, 2009 Report Share Posted March 5, 2009 arms Quote Link to comment Share on other sites More sharing options...
tryme24 Posted March 5, 2009 Report Share Posted March 5, 2009 i got a set for sale if any one wants the mget back to me Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted March 5, 2009 Author Report Share Posted March 5, 2009 Wow, I can't believe this thread is still so close to the top. In case you missed my update in the Suspension section, I am back around the HQ. I have spacers in the works and possibly tie rods for the swap also. All of these parts are made from 7075 alloy, which means they are tough as you can handle. Does this mean they are a little more expensive than options I've seen, slightly yes, but trust me, you will never have to replcae them! I have been running this swap for two years now and the parts show no wear at all. The price on the spacers was $50 shipped prior and will be very close to that; shipping is still getting worked out, but shouldn't change much at all IF ANY. I'm kind of jumping right back in to this after a hiatus of more than a year so forgive me, but I believe I actually have a complete swap in the box and ready to go once I get spacers in. Spacers are probably less than two weeks out at this point. Quote Link to comment Share on other sites More sharing options...
Darthwall Posted March 5, 2009 Report Share Posted March 5, 2009 Wow, I can't believe this thread is still so close to the top. In case you missed my update in the Suspension section, I am back around the HQ. I have spacers in the works and possibly tie rods for the swap also. All of these parts are made from 7075 alloy, which means they are tough as you can handle. Does this mean they are a little more expensive than options I've seen, slightly yes, but trust me, you will never have to replcae them! I have been running this swap for two years now and the parts show no wear at all. The price on the spacers was $50 shipped prior and will be very close to that; shipping is still getting worked out, but shouldn't change much at all IF ANY. I'm kind of jumping right back in to this after a hiatus of more than a year so forgive me, but I believe I actually have a complete swap in the box and ready to go once I get spacers in. Spacers are probably less than two weeks out at this point. sweet good to see your back on here I have been looking for a set of bushings for awhile now so when they come in put me down for a set of them Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted March 6, 2009 Author Report Share Posted March 6, 2009 sweet good to see your back on here I have been looking for a set of bushings for awhile now so when they come in put me down for a set of them Sounds great! I should know about the spacer/sleeves within the next day or two. I'll try to keep both the Suspension and For Sale forum postings updated with all the current info. Thanks again everyone! - Brian Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted March 6, 2009 Author Report Share Posted March 6, 2009 Sounds great! I should know about the spacer/sleeves within the next day or two. I'll try to keep both the Suspension and For Sale forum postings updated with all the current info. Thanks again everyone! - Brian Spacer/sleeves should be available and ready to ship by mid-week next week. I should also have one complete set of A-arms, could package with NOSS 7075 tie rods as well (specific for the conversion). A-arms are silver, do not have shocks at this time. Working on getting more core parts to build complete A-arm kits from. I know there have to be some budget minded people out there right now; I will also do the modification to your arms using my jigs if you want to locate your own core parts. Thanks! - Brian Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted March 10, 2009 Author Report Share Posted March 10, 2009 Okay, I will have spacer/sleeves ready to go by Thursday, I have a complete set of A-arms, a second set on the way that will need to be modified once I get them, one silver set, one orange set. I may also have a line on a set of shocks and may possibly be putting my 2007 SE shocks with H/L speed compression adjustment up for sale also. Quote Link to comment Share on other sites More sharing options...
2003LimitedBanshee Posted March 13, 2009 Author Report Share Posted March 13, 2009 450 A-arm conversion spacers are available again. Price is $55 shipped to any lower 48 state. Will also have two complete A-arm kits available; one in silver, one in orange. Not sure at this time if I will have shocks available or not. Thanks! - Brian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.