nunyabinness Posted April 7, 2007 Report Share Posted April 7, 2007 ok my banshee is almost to roller status (then i get to start on the motor work). i have a stock swingarm, stock linkage, and a stock rear shock... i have the shock connected to the linkage but the upper shock hole is like 4 inches off from being able to go into the upper mount. i put my foot on the carrier and grabbed the grab bar and tried to push them apart but nothing... any ideas would be greatly appreciated... (hopefully my post makes sense) i will try to get pics up in a little bit to help show what i am talking about. Quote Link to comment Share on other sites More sharing options...
yamaha04 Posted April 7, 2007 Report Share Posted April 7, 2007 probably have the linkage in wrong or upside down Quote Link to comment Share on other sites More sharing options...
FireHead Posted April 8, 2007 Report Share Posted April 8, 2007 probably have the linkage in wrong or upside down The larger portion of the linkage may be in backwards. Post up a picture and we'll sort you out. :thumbsup: Quote Link to comment Share on other sites More sharing options...
nunyabinness Posted April 8, 2007 Author Report Share Posted April 8, 2007 thank you guys for the help. i did figure out my problem... hahahaha.... the linkage i had put on there was the linkage from a warrior (i think). i am building this thing out of spare parts and i hadn't checked what i was using and put the wrong linkage on. Quote Link to comment Share on other sites More sharing options...
FireHead Posted April 9, 2007 Report Share Posted April 9, 2007 thank you guys for the help. i did figure out my problem... hahahaha.... the linkage i had put on there was the linkage from a warrior (i think). i am building this thing out of spare parts and i hadn't checked what i was using and put the wrong linkage on. Congratulations on getting it fixed! :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.