REFLOYD Posted April 2, 2007 Report Share Posted April 2, 2007 How do I disable the park brake switch? I removed the park brake cable and mechinism from the clutch lever and now it wont rev up unless I mash the button on the brake switch. The tors has been removed. Thanks, Robert Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted April 2, 2007 Report Share Posted April 2, 2007 How do I disable the park brake switch? I removed the park brake cable and mechinism from the clutch lever and now it wont rev up unless I mash the button on the brake switch. The tors has been removed. Thanks, Robert I've heard you just un plug it...I just wired mine shut (like the p-brake is off) where the cable went through, but I kept the stock lever set up on Quote Link to comment Share on other sites More sharing options...
Screaming Yellow Zonker Posted April 2, 2007 Report Share Posted April 2, 2007 if your machine is a 97 or newer just go back to the CDI plug and cut the green wire with the yellow tracer. make sure to tape off the end or it can ground against the frame and activate the TORS. Quote Link to comment Share on other sites More sharing options...
MILO Posted April 2, 2007 Report Share Posted April 2, 2007 (edited) I've heard you just un plug it...I just wired mine shut (like the p-brake is off) where the cable went through, but I kept the stock lever set up on i think i just unplugged mine, not sure which way i did it, but either should work fine. i hated the way the perch looked with the e-brake shit on there so i ground it off and repainted it. i guess i was to cheap to buy a new one :biggrin: Edited April 2, 2007 by MILO Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.