Jump to content

Is it bad to mix maxim gear oil with belray?


Recommended Posts

Well its not ever real good to mix two different manufacturers oils. It can cause premature heat break down, varnishing, and sludging in an engine. With spending big bucks on a new tranny or clutch in mind, I wouldn't do it.

Link to comment
Share on other sites

well what about lucas heavy duty oil stabilizer?

it says it blends with other automotiv lubrcant even ATF, mineral oil and synthetic oil

your supposed to put 200ml in with the other oil you use

so it would be 1.3 litres of yamalube4 and 200ml of the lucas stuffed

Link to comment
Share on other sites

No, technically there is no reason you cannot mix oil..... But don't expect to mix conventional oil and synthetic and get the same protection... You won't. Or weights of oil.. But they will all mix. But if you mix a quart of 10/30 and a quart of 10/40 you will affect the viscosity.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...