ssincity Posted March 24, 2007 Report Share Posted March 24, 2007 Again, did the search and found nada! I am trying to get my ride back together for the weekend. How the hell do you get all the cushions in. The first 4 drop in.. The other side wont contract enough to fit in the holes! Is there a trick? Quote Link to comment Share on other sites More sharing options...
wesw Posted March 24, 2007 Report Share Posted March 24, 2007 put the basket on something firm and put the cushion by the hole, slowly tap it with like a handle of a hammer or something when it gets started then put more force into it. you have to drive them in. they wont go in easy. stuff might get cut off an edge its ok. i just kinda sit the cushion in the hole and tapped it till it somewhat started then tapped lot harder to get them in there. fun fun. Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted March 24, 2007 Report Share Posted March 24, 2007 I dont know anyone who puts those back in, I haven't in the last 14 years of owning a banshee. Leave em out, just make sure the steel plates are facing the right way, thats one not a whole lot of people know about. Quote Link to comment Share on other sites More sharing options...
ssincity Posted March 24, 2007 Author Report Share Posted March 24, 2007 I dont know anyone who puts those back in, I haven't in the last 14 years of owning a banshee. Leave em out, just make sure the steel plates are facing the right way, thats one not a whole lot of people know about. Okay now you have me thinking. I am putting in the tusk kit. The plates have a rounded side and a flate side? Quote Link to comment Share on other sites More sharing options...
wesw Posted March 24, 2007 Report Share Posted March 24, 2007 ok are you talking the little round clutch cushions that go in the basket or the orings that go under the steels and fibers in a clutch. you said clutch cushions, and they way your talking it seems like the orings??? Quote Link to comment Share on other sites More sharing options...
ssincity Posted March 24, 2007 Author Report Share Posted March 24, 2007 ok are you talking the little round clutch cushions that go in the basket or the orings that go under the steels and fibers in a clutch. you said clutch cushions, and they way your talking it seems like the orings??? THe cushions that go in the back of the basket and gear on my HINSON basket. The ones that were (i just got them all in) harder then fk(( to get in.. I got the new red ones from Jeff. Quote Link to comment Share on other sites More sharing options...
wesw Posted March 24, 2007 Report Share Posted March 24, 2007 ok but sounded like the other guy was talking about o rings on the stock clutch. but wtf do i know. Quote Link to comment Share on other sites More sharing options...
odaen Posted March 24, 2007 Report Share Posted March 24, 2007 THe cushions that go in the back of the basket and gear on my HINSON basket. The ones that were (i just got them all in) harder then fk(( to get in.. I got the new red ones from Jeff. Wes is GAY in the happy sense, and the sexual orientation sense as well. Why not call the person you bought them from? I'm sure he'd be more than happy to help out a customer. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted March 24, 2007 Report Share Posted March 24, 2007 Ssincity, put in the first 4, now the fun begins. Take the next one and put a corner of it in and then shoe horn it in with a small pocket screwdriver. Once you get it started in you can use a small ball pein hammer and lightly tap it in the rest of the way. Now do the rest the same, dont forget your spring/wave washer in the middle (faces up toward the outside) and locktight the screws. Please call if you need help~! Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted March 24, 2007 Report Share Posted March 24, 2007 Okay now you have me thinking. I am putting in the tusk kit. The plates have a rounded side and a flate side? Bingo! Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 24, 2007 Report Share Posted March 24, 2007 Bingo! ??? Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted March 25, 2007 Report Share Posted March 25, 2007 He figured out the steels are directional. Quote Link to comment Share on other sites More sharing options...
wesw Posted March 26, 2007 Report Share Posted March 26, 2007 please explain how they are directional, last time i put a clutch in it didnt matter how the steels went in?????????? Quote Link to comment Share on other sites More sharing options...
Snopczynski Posted March 26, 2007 Report Share Posted March 26, 2007 I guarantee you if you pull it back out you will see one side of the steel has a sharp edge and one side has a rounded edge. This is what makes them directional. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted March 27, 2007 Report Share Posted March 27, 2007 I guarantee you if you pull it back out you will see one side of the steel has a sharp edge and one side has a rounded edge. This is what makes them directional. So witch way do they go in then? Roled edge in or out? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.