banshee 4 me Posted March 16, 2007 Report Share Posted March 16, 2007 just wondering if anyone out there is still running the old toomey t3's.i hear they are the sickest pipes toomey ever made?is this true,does anyone have any for sale? Quote Link to comment Share on other sites More sharing options...
djackbanshee Posted March 16, 2007 Report Share Posted March 16, 2007 I heard that too ive seen a website a while ago where the guy would cut 1 inch from the middle part and they would be sick There is some on ebay sometimes Quote Link to comment Share on other sites More sharing options...
96_banshee_96 Posted March 16, 2007 Report Share Posted March 16, 2007 (edited) A guy was selling some here not to long ago probly like 2 weeks ago. I was going to buy them but they had a few dings in them and they had fmf silencers. Shit if I knew they were suppose to be badass I would of ditched these adjustible LRD's and jumped on the T3's :thumbsup: Edited March 16, 2007 by 96_banshee_96 Quote Link to comment Share on other sites More sharing options...
HardIzZlE Posted March 16, 2007 Report Share Posted March 16, 2007 why toomey stop making them Quote Link to comment Share on other sites More sharing options...
JKJK Posted March 17, 2007 Report Share Posted March 17, 2007 In stock form they have a very lazy bottom then they hit hard+pull very strong on top.If your on the pipe allot they are a great choice,but for anything technical they suck. They are very comparable to the t5's with less bottom.By removing material from the belly of the pipe it allows them to pull more rpm at the expense of becoming even more peaky. I have a complete set(not-cut) in good condition if interested make me an offer. They were designed to fit on the J-arm set ups+will not fit on A-arm frames. Quote Link to comment Share on other sites More sharing options...
CHAINSAW Posted March 19, 2007 Report Share Posted March 19, 2007 (edited) I had a set on an old Drag shee I had a few years back. The bike didnt run the best, so I cant give you an honest review of them. One thing however, mine would rub on the frame and rattle.... which was super annoying. I tried sticking rubber bumpers on the frame, but it was right at that first curve, and the hottest point of the pipe. Ill have to see if I can dig up old pics of the shee I had them on as well. Edited March 19, 2007 by CHAINSAW Quote Link to comment Share on other sites More sharing options...
kawicat Posted March 27, 2007 Report Share Posted March 27, 2007 I had a set on an old Drag shee I had a few years back. The bike didnt run the best, so I cant give you an honest review of them. One thing however, mine would rub on the frame and rattle.... which was super annoying. I tried sticking rubber bumpers on the frame, but it was right at that first curve, and the hottest point of the pipe. Ill have to see if I can dig up old pics of the shee I had them on as well. My bro runs T3's on his 89 shee, and they rock. He is ported with stock reeds and carbs. It pulls everywhere. If I had a j-arm shee i would all over a set. Toomey still sells the jet kit for the older pipes, and with the lid on it is spot on. Quote Link to comment Share on other sites More sharing options...
mdgoodrich Posted December 26, 2007 Report Share Posted December 26, 2007 I just baught a set of T3s of ebay and the guy said he had them on a 94 I think. I got them but was unable to install them on my 03. Tried to email the guy but he didnt respond. I actually emailed Toomey and they said it should fit but something about removeing the a-arm bolt to get them on. Just wondered if anyone has installed them on an a-arm machine? thanks Matt Quote Link to comment Share on other sites More sharing options...
ABL Posted May 11, 2008 Report Share Posted May 11, 2008 I bought the T3's from lil mikey and got them fitted to my a arm banshee. They beat the shit out of t5's. Now a disclaimer--that is going stock motors only pipes and only about a 1/4 mile. on the bottom the t5's easily have more grunt but with half bald tires all I have to do is keep er' pinned and I am loving the t3's. As I said earlier the cut t3's everyone talks about were the platform for the shearer pipe design. toomey quit making 3's whem the J went to an A frame. Quote Link to comment Share on other sites More sharing options...
lilmikey Posted May 12, 2008 Report Share Posted May 12, 2008 I bought the T3's from lil mikey and got them fitted to my a arm banshee. They beat the shit out of t5's. Now a disclaimer--that is going stock motors only pipes and only about a 1/4 mile. on the bottom the t5's easily have more grunt but with half bald tires all I have to do is keep er' pinned and I am loving the t3's. As I said earlier the cut t3's everyone talks about were the platform for the shearer pipe design. toomey quit making 3's whem the J went to an A frame. I like to hear good results, I told everyone who was interested in those t3s when I was selling them real cheap, not to pass up a good deal on a great set of pipes. Those t3s were the shit back in the day I ran them on my 89 with just a milled head some reeds and no porting. I am really glad to hear someone is getting good use out of them. thanks again. MIke. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.